Heavy Duty Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The heavy duty scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated heavy duty scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Industrial Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The industrial scales are verifiable, calibrated U-shaped pallet scales intended for mobile use. The dimensions of the calibrated industrial scales are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Legal for Trade Balance PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The floor scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated floor scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Material Tester PCE-HT 225E
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

NDT Test Instruments PCE-HT 225E
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

NTEP Certified Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The floor scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated floor scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Pallet Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The pallet scales are calibratable, and also initially calibrated, designed for mobile applications and having a U-shaped design. The size and measurements of the calibrated pallet scales PCE-SD U series are accordant to European standard pallet scales (1200 x 800 mm). The U-shape of the calibrated pallet scales allows easy positioning of EU standard pallets on the scales, preferably with a forklift.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Stainless Steel Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The stainless steel scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated stainless steel scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Surface Testing - Concrete Hammer PCE-HT 225E
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty

PCE-HT 225E is a surface testing concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

System Balance PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The system balance is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated system balance are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5kg
- Verifiable M III
Trade Approved Scale PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The trade approved scale is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated trade approved scale are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Weighbridge PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The weighbridge is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighbridge are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Weighing Beam PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The weighing beam is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weighing beam are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Weight Indicator PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The weight indicator is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weight indicator are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Portable Ultrasonic Flow Meter PCE-TDS 200 SR
£ 1,948.00
Price excl. VAT &. delivery
2 year Warranty
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters: DN 15 ... 100 / 20 ... 108 mm
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity, volume flow and volume
- Interface: USB
- Data logger: 32 GB memory capacity (10 million measuring points)
- LiPo battery
Ultrasonic Flow Meter PCE-TDS 200 SR
£ 1,948.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 15 ... 100 / 20 ... 108 mm
- for different media
- for different pipe materials
- Measuring parameters: Flow velocity,
  volume flow and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
Test Stand for Force Gauge PCE-MTS500
£ 1,931.00
Price excl. VAT &. delivery
2 year Warranty
Our test stand for force gauge PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The test stand for force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the test stand for force gauge offers the operator the most precise equality of test bench and sample.

- Measuring range: max. 5000 N / 500 kg
- Feed speed: 30 mm/min ... 230 mm/min
- All PCE devices adaptable
- Robust steel design

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
Universal Testing Machine PCE-MTS500
£ 1,931.00
Price excl. VAT &. delivery
2 year Warranty
Our universal testing machine PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.

- Measuring range: max. 5000 N / 500 kg
- Feed speed: 30 mm/min ... 230 mm/min
- All PCE devices adaptable
- Robust steel design

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***