Order no.: PCE-313A

PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital thermo-hygrometer also has a port for connecting a type-K thermocouple.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 24
The Thermometer PCE-TC 24 is a picture-in-picture thermal camera. This thermometer measures the temperature between -20 and 380 °C without contact. The thermometer is suitable for fast and simple temperature measurements in the house, switch cabinets etc. 

- Measuring range: -20 ... 380 °C
- Field of view: 32 x 32 °
- Frame rate: 9 Hz
- Picture-in-Picture function
- Micro-SD card memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 24FN
The PCE-CT 24FN Thickness Gauge allows you to quickly and accurately determine, for example, ink layer thicknesses. The mobile device enables thickness measurements on ferrous and non-ferrous metals. The measured value is displayed directly on the LC display. 

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 24FN
The PCE-CT 24FN Thickness meter allows you to quickly and accurately determine, for example, ink layer thicknesses. The mobile device enables thickness measurements on ferrous and non-ferrous metals. The measured value is displayed directly on the LC display. 

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S vibration analyzer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration analyzer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units only
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10 mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

 

The PCE-VT 1100S vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.
 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Holds the reading after each measurement in metric units
- Portable and battery operated
- Needle probe: 45 mm / 1.77 in

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The vibration test instrument is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration test instrument, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units only
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10 mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S vibration test instrument is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this vibration test instrument is used for rapid measurement of imbalance and for checking bearing and gear conditions.


 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Holds the reading after each measurement in metric units
- Portable and battery operated
- Needle probe: 45 mm / 1.77 in

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228HTE

The Water Analysis Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212 °F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: KWR1

Air flow meter PCE-KWR1 for example for PCE-WL wind logger. Basic wind direction sensor with potentiometer output.


- Output: 0 … 1000 Ohm
- Measurement reading range: 10 … 350 °
- Accuracy: ± 5 °

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable detector or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20P
The use of a pH meter with a special glass electrode is one of the well-known methods of pH measurement in cosmetics. The pH meter PCE-PH20P ensures that you get reliable results when taking measurements in shampoos, liquid cleansing toners and foams, gels and many other substances (containing water).


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable or pipe locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SHT-5N
Test stand for horizontal or vertical mounting of the sensor. (For torque meter with max. 5 Nm).
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a wire tracer or cable locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 112-ICA
The air humidity meter PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 air humidity meter records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer