Industrial Measurement Products and Solutions
Order no.: PCE-VT 1100

The PCE-VT 1100 Accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

- Vibration Acceleration: 0.01 ... 199.9 m/s2 (peak value)
- Vibration Speed: 0.01 ... 199.9 mm/s (effective)
Vibration Displacement:  0.001 ... 1.999 mm (peak-peak)
- Accuracy: ±5%, ±2 Digits (20 Hz ... 1 KHz) / ±10%, ±2 Digits (10 Hz ... 20 Hz)
- Frequency: Accel. and Vel. 10 Hz ... 1 kHz, Displacement 10 Hz ... 500 Hz 
- Frequency range: 10 Hz ... 1 kHz 
- Needle probes: 10mm / 0.39" // 45mm / 1.77"


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S accelerometer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital temperature and air humidity meter also has a port for connecting a type-K thermocouple.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 24FN
The PCE-CT 24FN Automotive tester allows you to quickly and accurately determine, for example, ink layer thicknesses. The mobile device enables thickness measurements on ferrous and non-ferrous metals. The measured value is displayed directly on the LC display. 

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA clamp meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA clamp meter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA clamp on tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA clamp on tester captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

The PCE-313 A Climate Meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Climate Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Climate Meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 24FN
The PCE-CT 24FN Coating thickness gauge allows you to quickly and accurately determine, for example, ink layer thicknesses. The mobile device enables thickness measurements on ferrous and non-ferrous metals. The measured value is displayed directly on the LC display. 

- Measuring range: 0 ... 1500 μm
- Resolution: 0.1 μm (at <100 μm)
- Accuracy: ± 3% + 1 μm (at> 150 μm)
- Alarm when limit value exceeded
- Graphical representation of the measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

The PCE-313 A Thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Easy to handle and battery operated
- Standard probe: 10mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA current clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA current clamp captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA digital multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA digital multimeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA electrical tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA electrical tester captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld electromagnetic field meter or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld electromagnetic field radiation detector or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld environmental electromagnetic field radiation meter or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld environmental electromagnetic field radiation tester or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228HTE

The Environmental Meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.


- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

The PCE-313 A Environmental Meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Environmental Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Environmental Meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer