Industrial Measurement Products and Solutions
Order no.: KWR1

Air flow meter PCE-KWR1 for example for PCE-WL wind logger. Basic wind direction sensor with potentiometer output.


- Output: 0 … 1000 Ohm
- Measurement reading range: 10 … 350 °
- Accuracy: ± 5 °

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable detector that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable detector or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable fault meter that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a cable locator that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or
  +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or
  -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20P
The use of a pH meter with a special glass electrode is one of the well-known methods of pH measurement in cosmetics. The pH meter PCE-PH20P ensures that you get reliable results when taking measurements in shampoos, liquid cleansing toners and foams, gels and many other substances (containing water).


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Applications: Shampoo, pastes, paints, cosmetics
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a pipe locator that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a cable or pipe locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SHT-5N
Test stand for horizontal or vertical mounting of the sensor. (For torque meter with max. 5 Nm).
Test Instruments manufacturer
Order no.: PCE-CL 10

PCE-CL 10 is a wire tracer that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.


- Operating temperature / humidity: 0 ... +40 ºC or +32 ... +104 ºF / max. 80% rh
- Storing temperature / humidity: -20 ... +60 ºC or -4 ... +140 ºF/ max. 80% rh
- Max. Voltage: 400 VAC (0 - 60 Hz) / 400 V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CL 20

PCE-CL 20 is a wire tracer or cable locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-C-R12LFC-H4

The flat miniature force sensor has a height of only 4 mm. With a diameter of 12 mm, this miniature force sensor is very compact. This force sensor achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-50 kg / 50-500 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 16
The air humidity meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the air humidity meter PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 16
The air quality meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the air quality meter PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 16
The CO2 analyzer PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the CO2 analyzer PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HS 150N-ICA

PCE-HS 150N is an affordable digital hanging scale, crane scale, weighing hook or electronic balance that offers quick, easy and accurate weighing of large objects, animals, fish and game. Simply mount the item to be weighed to the hook or snap hook (both hooks are included). Useful for forklift and industrial applications and as well as recreational fishing and hunting, the PCE-HS 150N digital hanging scale features:


- Weight range up to 150 kg / 330 lbs
- Battery operation (3 x AA 1.5 V batteries provided)
- Auto-off, power-saving function (can be deactivated, if preferred)
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS 30

PCE-WS 30 is an accurate and affordable digital tabletop scale. Featuring adjustable feet and a built-in water bubble level, this benchtop electronic balance ensures precision with a full 100% tare weight range. PCE-WS 30 has a compact design and can be powered by the electric power adapter or the internal battery, making the scale portable when necessary.


- Weighing capacity: 30000 g / 30.0 kg / 66.0 lb
- Resolution or readability: 0.5
- Memory: 99 readings

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 16
The digital thermometer PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the digital thermometer PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Test Instruments manufacturer