Surface Testing - Inspection Camera PCE-VE 355N
£ 1,762.00
Price excl. VAT &. delivery
2 year Warranty

The surface testing PCE-VE 355N is a two-way articulating inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Videoscope PCE-VE 355N
£ 1,762.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VE 355N is a two-way articulating videoscope, borescope, inspection camera or industrial endoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.


- 2-way camera probe
- Diameter camera head: Ø 4.5mm / 0.18"
- Interface: Mini-USB 1.1 und AV out/in
- Memory: 8 GB SD memory card (incl.)
- Cable length: 1.5 m / 4ft 11"

Torque Meter PCE-FB 500TW
£ 1,759.00
Price excl. VAT &. delivery
2 year Warranty

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm / 368.78 ft-lb, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 500 Nm (50 kgfm) / 368.78 ft-lb
- Resolution: 1 Nm / 0.738 ft-lb
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Electrical Tester PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 

Clamp Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Clamp-On Tester PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Current Clamp PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

HVAC Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
- incl. ISO Calibration Certificate 

Portable Power Analyzer PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile Portable Power Analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Power Analyzer PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Power Data Logger PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Single Phase / 1-Phase Power Meter PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Three-Phase Power Analyzer PCE-360-ICA incl ISO Calibration
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The 3-Phase Power Meter / 3-Phase Power Analyzer is a power meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 
incl. ISO Calibration Certificate 

Force Gage PCE-CTT 5
£ 1,749.00
Price excl. VAT &. delivery
2 year Warranty
The force gage for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gage for drinking bottles.

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Force Gauge PCE-CTT 5
£ 1,749.00
Price excl. VAT &. delivery
2 year Warranty
The Force Gauge for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the force gauge for drinking bottles.

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Torque Meter PCE-CTT 5
£ 1,749.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Viscometer measuring system R1-R5 for RM 100p
£ 1,732.00
Price excl. VAT &. delivery
2 year Warranty

The paddle measurement system is often used as a standard system in the cosmetics and paint industry. Another field of application is food and beverage production. Even with heterogeneous products that contain solids or lumps in permeated fluids, the measurement system also can be used.

For viscosities of 1 ... 510 000 000 mPa.s