Query results | PCE Instruments

£ 1,651.00

Price excl. VAT &. delivery
2 year Warranty

The TXgard-Plus oxygen meter is a robust, flame-proof gas sensor for toxic gases or oxygen. The TXgard-Plus oxygen meter is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of an integrated, electrochemical detector.

- Different versions available
- Flame-proof construction with ATEX approval
- Electrochemical detector
- 3-wire 4 ... 20 mA output

Color Meter PCE-CSM 4

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

This color meter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The color meter simulates to see surfaces like with human eyes.

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

Colorimeter PCE-CSM 4

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.

Electrical Tester 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W

- Current range: 0.001 ... 20 A AC

- Frequency, power factor, energy

- Accuracy: ±(0.4% of reading + 0.1)

- 2 input channels

- Color display
- incl. ISO-Calibration Certificate

Electrical Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Force Gage PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gage PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

Force Gauge PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

Force Gauge PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

Force Gauge PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

HVAC Meter 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The HVAC meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W

- Current range: 0.001 ... 20 A AC

- Frequency, power factor, energy

- Accuracy: ±(0.4% of reading + 0.1)

- 2 input channels

- Color display
- incl. ISO-Calibration Certificate

Insulation Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The insulation tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the insulation tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Isolation Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The isolation meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the isolation meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Paint Testing Equipment PCE-CSM 4

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

This paint testing song is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The paint testing equipment simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The paint testing equipment is delivered manufacturer calibrated, but can optionally be certified to ISO standards.

PAT Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Photovoltaic Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the photovoltaic meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Portable Power Analyzer 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The portable power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W

- Current range: 0.001 ... 20 A AC

- Frequency, power factor, energy

- Accuracy: ±(0.4% of reading + 0.1)

- 2 input channels

- Color display
- incl. ISO-Calibration Certificate