Industrial Measurement Products and Solutions
Order no.: PCE-LDC 10

The Gas Leak Detector PCE-LDC 10 is used in a wide range of industries. For example, the gas leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDC 10

The ultrasonic leak detector PCE-LDC 10 is used in a wide range of industries. For example, the ultrasonic leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDC 10

The ultrasonic tester leak detector PCE-LDC 10 is used in a wide range of industries. For example, the ultrasonic leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.


- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: EDX-1T

The EDxtreme 1T Crane Scale is built with the best materials and designed with cutting-edge features, such as radio control. The Crane Scale is clearly the choice for reliability in any environment – in-plant or out on the job site. The instrument comes manufacturer calibrated, but can additionally be certified to ISO standards.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable  

 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: EDX-1T

The EDxtreme 1T Dynamometer is built with the best materials and designed with cutting-edge features, such as radio control. The Dynamometer is clearly the choice for reliability in any environment – in-plant or out on the job site. The instrument comes manufacturer calibrated, but can additionally be certified to ISO standards.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable

 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: EDX-1T

The EDxtreme 1T Force Gauge is built with the best materials and designed with cutting-edge features, such as radio control. The Force Gauge is clearly the choice for reliability in any environment – in-plant or out on the job site. The instrument comes manufacturer calibrated, but can additionally be certified to ISO standards.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable  

 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: EDX-1T

The EDxtreme 1T Hanging Scales are built with the best materials and designed with cutting-edge features, such as radio control. The hanging scales are clearly the choice for reliability in any environment – in-plant or out on the job site. The instrument comes manufacturer calibrated, but can additionally be certified to ISO standards.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: EDX-1T

The Industrial Scales EDxtreme are built with the best materials and designed with cutting-edge features like radio control. The Industrial Scales EDx are clearly the choice for reliability in any environment – in-plant or out on the job site.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable 

 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: EDX-1T

The EDxtreme 1T Weighing Hook is built with the best materials and designed with cutting-edge features, such as radio control. The Weighing Hook is clearly the choice for reliability in any environment – in-plant or out on the job site. The instrument comes manufacturer calibrated, but can additionally be certified to ISO standards.


- Measuring range: 1,000 kg / 2,500 lbf / 10,000 N
- Resolution: 0.2 kgf / 0.5 lbf / 2 N
- Accuracy: 0.1%
- Display Type: Digital
- Sensor: Internal
- Interface: RS-232
- Calibratable  

 

Manufacturer: Dillon Force Measurement Equipment
Test Instruments manufacturer
Order no.: PCE-CSM 5

The color meter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the color meter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the color meter PCE-CSM 5 comes with two different measuring apertures (Ø6 mm and Ø10 mm).


- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 5

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø6 mm and Ø10 mm). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI Durometer PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included
- Other probes as option

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI material tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 5

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø6 mm and Ø10 mm). 

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures 6 and 10 mm
- Illumination/Viewing Angles 8°/d and CIE 10°

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI ultrasonic tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI ultrasonic tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 50039447

The optical laser distance meter (sensor) ODSL 30 analog output model covers a vast application range. For example the optical laser distance meter (sensor) allows positioning transfer cars, cranes, lifting facilities. Even a measurement of the volume can be performed by measuring in two dimensions with simultaneously moving the object can be performed by means of the optical laser distance meter (sensor) ODSL 30 series. There are different editions of the optical distance sensor purchasable.


- Measurement range: 0.2 ... 30 m / 200 ... 30,000 mm
- Geometric resolution: 1.0 mm
- Outputs: PNP / NPN / mA / V
- 655 nm red light

 

Manufacturer: Leuze electronic GmbH + Co. KG
Test Instruments manufacturer
Order no.: PCE-IGM 100-ICA

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.


- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IGM 100-ICA

A gloss meter is a tester for determining surface gloss. Thereby, with the glossmeter, spectral reflections of a light beam that hits the surface, are measured. The touch screen allows for easy navigation.


- Measuring geometries: 20° / 60° / 85°
- Measuring range: 20° : 0 ... 1000 GU / 60° : 0 ... 1000 GU / 85° : 0 ... 160 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457 
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 225E

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


- Test range: 10 ... 60 MPa or 100 ... 600 kg/cm² / 1450.38 ... 8702.26 psi
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
- Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
- Data processing software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer