Industrial Measurement Products and Solutions
Order no.: PCE-FB 500TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 500 Nm (50 kgfm)
- Resolution: 1 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
£ 1,495.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: IRC 6637SAW

The Vector 4D people counter infrared imaging camera is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations. The Vector 4D - SafeCount people counter is equipped with special firmware that allows the number of customers in a store to be measured quickly and easily.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement
- People counter for secure access control

Manufacturer: PCE Instruments
£ 1,489.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: IRC 6637SAW

The Vector 4D people counter thermal imager is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations. The Vector 4D - SafeCount people counter is equipped with special firmware that allows the number of customers in a store to be measured quickly and easily.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement
- People counter for secure access control

Manufacturer: PCE Instruments
£ 1,489.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: IRC 6637SAW

The Vector 4D people counter thermal imaging camera is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations. The Vector 4D - SafeCount people counter is equipped with special firmware that allows the number of customers in a store to be measured quickly and easily.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement
- People counter for secure access control

Manufacturer: PCE Instruments
£ 1,489.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: IRC 6637SAW

The Vector 4D people counter is the most advanced people counter in the world. The time of flight measurement method does not just allow people to be counted, but rather to recognize them. The people counter works completely anonymously and in compliance with data protection regulations. The Vector 4D - SafeCount people counter is equipped with special firmware that allows the number of customers in a store to be measured quickly and easily.

- Mounting height: 2 ... 4.5 m
- Detection range: 1.6 ... 5.1 m
- Acquisition speed: max. 5 m/s
- Data protection-compliant people counting
- Employee recognition
- Height measurement
- Connection of 32 people counters possible
- Dwell measurement
- People counter for secure access control

Manufacturer: PCE Instruments
£ 1,489.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 1200BT-ICA
The Bluetooth handheld surface - roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197 µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079 µinch... 7874.016 µinch measurement range
- Induction method with Diamond sensor
- Large OLED display
- Display for the position of the probe
- Micro-USB interface
- Bluetooth
- Download the app for free from the Google Play Store
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 1200BT-ICA
The Bluetooth material surface roughness tester is used to determine surface roughness. The compact material tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197 µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079 µinch... 7874.016 µinch measurement range
- Induction method with Diamond sensor
- Large OLED display
- Display for the position of the probe
- Micro-USB interface
- Bluetooth
- Download the app for free from the Google Play Store
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The material surface roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 1200BT-ICA
The Bluetooth handheld surface - roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197 µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079 µinch... 7874.016 µinch measurement range
- Induction method with Diamond sensor
- Large OLED display
- Display for the position of the probe
- Micro-USB interface
- Bluetooth
- Download the app for free from the Google Play Store
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 1200BT-ICA
The Bluetooth profilometer - roughness tester is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197 µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079 µinch... 7874.016 µinch measurement range
- Induction method with Diamond sensor
- Large OLED display
- Display for the position of the probe
- Micro-USB interface
- Bluetooth
- Download the app for free from the Google Play Store
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The profilometer PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000-ICA can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo probe. The profilometer PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

- Measuring ranges Ra, Rq, Rc: 0.005 µm ... 16 µm / 0.197 µinch ... 629.9 µinch
- Measurement accuracy: <± 10%
- Micro USB interface
- 3 different cut-off wavelengths
- PC software
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The surface tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The surface tester PCE-RT 2000-ICA can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezo probe. The surface tester PCE-RT 2000-ICA can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RT 1200BT-ICA
The Bluetooth surface testing - roughness tester is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197 µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079 µinch... 7874.016 µinch measurement range
- Induction method with Diamond sensor
- Large OLED display
- Display for the position of the probe
- Micro-USB interface
- Bluetooth
- Download the app for free from the Google Play Store
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,477.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: TXgard-Plus-CO

The TXgard-Plus-CO is a single-gas Gassensor used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Carbon Monoxide, CO, 0 ... 500 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,459.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: TXgard-Plus-H2S

The TXgard-Plus-H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H2S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Hydrogen Sulfide, H2S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,459.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-SD 6000B

The floor scale PCE-SD..B is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 6000 kg
- Readability: 2 kg
- Calibration value: 2 kg
- Verifiable M III

Manufacturer: PCE Instruments
£ 1,469.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-SD 6000B

The industrial scale PCE-SD..B is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 6000 kg
- Readability: 2 kg
- Calibration value: 2 kg
- Verifiable M III

Manufacturer: PCE Instruments
£ 1,469.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-SD 6000B

The pallet beams PCE-SD..B are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 6000 kg
- Readability: 2 kg
- Calibration value: 2 kg
- Verifiable M III

Manufacturer: PCE Instruments
£ 1,469.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer