Query results | PCE Instruments

Closing Force Transducer FM100 for Doors and Gates

£ 1,412.00

Price excl. VAT &. delivery
2 year Warranty

The closing force transducer is an electronic closing force measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

- Measuring range: 0 ... 2000 N
- Stiffness: 500 N/mm
- Accuracy: +/- 3N or 3% of reading
- Data logger unit with LCD display
- Professional, comprehensive PC software
- Memory for 100 measurements
- Standards – EN 12445/12453, EN 60335-2, DIN V 18650, ASR A1.7, etc.
- Incl. ISO calibration certificate

Force Gage PCE-DFG N 100TW

£ 1,405.00

Price excl. VAT &. delivery
2 year Warranty

The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display

Force Gauge PCE-DFG N 100TW

£ 1,405.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

Torque Meter PCE-DFG N 100TW

£ 1,405.00

Price excl. VAT &. delivery
2 year Warranty

The torque meter PCE-DFG N 100TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate

£ 1,397.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

NDT Test Instruments PCE-PGM 100-ICA incl. ISO calibration certificate

£ 1,397.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 100-ICA incl. ISO calibration certificate

£ 1,397.00

Price excl. VAT &. delivery
2 year Warranty

Surface Testing - Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate

£ 1,397.00

Price excl. VAT &. delivery
2 year Warranty

Crane Scales PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The crane scales are ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the crane scales. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Force Gage PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Force Gauge PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Hanging Scales PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 3 Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Comes with remote control indicator
- Incl. ISO calibration certificate

Suspended Scale PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The suspended scale is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the suspended scale. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs

- Resolution: 1 kg / 10 N

- Minimum load: 10 kg

- Supplied with remote control indicator

- Incl. ISO calibration certificate

Tension Dynamometer PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Weighing Hook PCE-DDM 3-ICA Incl. ISO Calibration

£ 1,392.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 3 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Weighing Hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

HVAC Meter PCE-TDS 75

£ 1,388.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Portable Ultrasonic Flow Meter PCE-TDS 75

£ 1,388.00

Price excl. VAT &. delivery
2 year Warranty

The Portable Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Portable Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1% of the measured value
- Pipe diameter: 25 ... 1200 mm (1 ... 48 in)
- Interface: RS232 & RS485
- Relay output

Ultrasonic Flow Meter PCE-TDS 75

£ 1,388.00

Price excl. VAT &. delivery
2 year Warranty

The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

- Measuring range: ± 0.03 ... ± 5 m / s
- Measuring accuracy: ± 1%
(of the measured value)
- Pipe size: DN 25 ... 1200 mm
- Interface: RS232 & RS485
- Relay output