- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes (swabs) for surfaces
- Incl. 100 Test tubes (swabs) for water

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer option
- Automatic calibration
- For HACCP implementation
- Data storage
- Enables rapid detection of bacterial or microbial residue
- Incl. 100 Test tubes or swabs

The closing force measuring device is an electronic measuring device for elevator doors and protective devices on machines. Typical use is both the final acceptance of new systems and regular inspection.

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- Precise measurements
- Robust design
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- App downloadable in Google Play Store
- Bluetooth interface
- Wireless
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate

The closing force transducer is an electronic closing force measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

- Measuring range: 0 ... 2000 N
- Stiffness: 500 N/mm
- Accuracy: +/- 3N or 3% of reading
- Data logger unit with LCD display
- Professional, comprehensive PC software
- Memory for 100 measurements
- Standards – EN 12445/12453, EN 60335-2, DIN V 18650, ASR A1.7, etc.
- Incl. ISO calibration certificate

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU
- Incl. ISO calibration certificate

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

- Measurement geometry: 20° / 60° / 85°
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Measuring range: 20°: 0 ... 1000 GU / 60°: 0 ... 1000 GU / 85°: 0 ... 160 GU 
- Incl. ISO calibration certificate

The crane scales are ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the crane scales. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate

The PCE-DDM 3 Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Comes with remote control indicator
- Incl. ISO calibration certificate

The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 3,000 kg / 30 kN / 6,614 lbs
- Resolution: 1 kg / 10 N
- Minimum load: 10 kg
- Supplied with remote control indicator
- Incl. ISO calibration certificate