Order no.: PCE-DC 41

The digital multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital multimeter, or you can use the integrated clamp mechanism. By using the clamp of the digital multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 10

PCE-RCM 10 is a portable handheld Dust Monitor used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this Dust Monitor also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics
- For indicative measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 10

PCE-RCM 10 is a portable handheld dust particle measuring device or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics
- For indicative measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41

The electrical tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the electrical tester, or you can use the integrated clamp mechanism. By using the clamp of the electrical tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction environmental meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Environmental Tester with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Environmental Tester is also used for determining illumination in the workplace, shop window displays, and by designers. It meets all international standards within the category for Environmental Testers.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane Environmental Tester is that it doesn't need to be held exactly in the direction of the wind. Environmental Tester with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane Environmental Tester, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-125

The PCE-125 series Ford Flow Cup Meter uses gravity to measure the flow rate of a liquid. Under ideal conditions, flow rate is proportional to kinematic viscosity. Thus, a Ford cup is used to determine the kinematic viscosity of fluids. The structure of the Flow Cup Meter is standardized according to ASTM D1200 (Ford). This Flow Cup Meter series features:


- Orifice diameters (Ø inside) of 2.5 mm, 3.4 mm, 4.1 mm or 5.2 mm / 0.10 in,
  0.13 in, 0.16 in or 0.20 in

- Viscosity ranges of 25 ... 120, 49 ... 220, 70 ... 370 or 215 ... 1,413 cSt / mm²/s
- Flow times of 40 ... 100, 25 ... 105 or 20 ... 105 seconds (s)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-125

The PCE-125 series Ford Flow Cup Viscometer uses gravity to measure the flow rate of a liquid. Under ideal conditions, flow rate is proportional to kinematic viscosity. Thus, a Ford cup is used to determine the kinematic viscosity of fluids. The structure of the Flow Cup Viscometer is standardized according to ASTM D1200 (Ford). This Flow Cup Viscometer series features:
- Orifice diameters (Ø inside) of 2.5 mm, 3.4 mm, 4.1 mm, or 5.2 mm / 0.10 in, 0.13 in, 0.16 in, or 0.20 in
- Viscosity ranges of 25 ... 120, 49 ... 220, 70 ... 370 or 215 ... 1,413 cSt / mm²/s
- Flow times of 40 ... 100, 25 ... 105 or 20 ... 105 seconds (s)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction humidity detector, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane HVAC Meter is that it doesn't need to be held exactly in the direction of the wind. HVAC Meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane HVAC Meter, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41

The HVAC meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the HVAC meter, or you can use the integrated clamp mechanism. By using the clamp of the HVAC meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Illuminometer with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Illuminometer is also used for determining illumination in the workplace, shop window displays, and by designers.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Light Meter with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Light Meter is also used for determining illumination in the workplace, shop window displays, and by designers.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Data Logger with memory for up to 16,000 readings is used for measuring light in industry, agriculture and research. The Data Logger is also used for determining illumination in the workplace, shop window displays, and by designers. This light logging instrument is calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Lux Meter with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Lux Meter is also used for determining illumination in the workplace, shop window displays, and by designers.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction climate meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction dew point thermometer or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction HVAC meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer