Order no.: PCE-MWM 240-A

Designed specifically for use real-time measurement of percent moisture measurement of bulk materials. Material in flowing mass, such as granular materials, sand, sawdust, fly ash (mineral), wood chips (surface to 5 cm), grain, powders, seed, and pastes is continuously measurable. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. 

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in moisture measurement of various bulk materials, these moisture analyzing test instruments are installed in bins, silos, troughs, bunkers, distributors, augers, and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TT 100
The light meter PCE-TT 100 is used to measure the transmission of visible light and UV light. For this purpose, the light meter uses a light source and a spectrophotometric sensor. Essentially, the light meter is used to measure the transmission of light through lenses, sunglasses and all other lenses.

- Wavelength in the measuring range: 300 ... 1100 nm
- Specific wavelength transmission
- Average transmission of visible light
- Visible smoothing of the light
- Visual color deviation
- Color (LAB), color (△ E)
- Yellowness index
- All wavelengths of the lights
- USB interface
- Windows software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TT 100
The light transmission meter PCE-TT 100 is used to measure the transmission of visible light and UV light. For this purpose, the light transmission meter uses a light source and a spectrophotometric sensor. Essentially, the light transmission meter is used to measure the transmission of light through lenses, sunglasses and all other lenses.

- Wavelength in the measuring range: 300 ... 1100 nm
- Specific wavelength transmission
- Average transmission of visible light
- Visible smoothing of the light
- Visual color deviation
- Color (LAB), color (△ E)
- Yellowness index
- All wavelengths of the lights
- USB interface
- Windows software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 10

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 condition monitoring sound level meter visualizes sound in real time, creating a visual road map to a sound’s source. Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 condition monitoring sound level meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. Lightweight and compact, the PCE-MSV 10 portable sound level meter features:


- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Real-time image and video recording

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 10

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 Decibel Meter visualizes sound in real time, creating a visual road map to a sound’s source. Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 Decibel Meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. Lightweight and compact, the PCE-MSV 10 portable Decibel Meter features:


- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Real-time image and video recording

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 10

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 noise meter visualizes sound in real time, creating a visible roadmap to a sound’s source. Also referred to as a sound meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 noise meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. Lightweight and compact, the PCE-MSV 10 portable sound camera features:


- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Real-time image and video recording

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 10

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate, lightweight and compact PCE-MSV 10 class 2 sound level meter visualizes sound in real time, creating a visual road map to a sound’s source. Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 sound level meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. 

- Class 2
- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Frequency weighting: A and linear
- Real-time image and video recording

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 10

In loud environments, it is often difficult to pinpoint the source of a sound. The easy-to-operate PCE-MSV 10 SPL meter visualizes sound in real time, creating a visual road map to a sound’s source. Also referred to as a noise meter, sound pressure meter, portable sound camera or sound level camera, the PCE-MSV 10 SPL meter can be used in various stages of machine and equipment design, manufacture and operation, from engineering research and development (R&D) to preventative maintenance and beyond. Lightweight and compact, the PCE-MSV 10 portable SPL meter features:


- Measurement range of 30 … 130 dBA
- Frequency range of 160 … 6000 Hz
- Real-time image and video recording

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI-450

The infrared imaging camera is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The infrared imaging camera does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.


- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 450

The Infrared Thermometer PCE-PI 450 is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The Infrared Thermometer PCE-PI 450 does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.


- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 450

The Inspection Camera PCE-PI 450 is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The thermal imager PCE-PI 450 does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.


- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface 

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 450

The Temperature Meter PCE-PI 450 is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The Temperature Meter PCE-PI 450 does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.


- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface 

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 450

The thermal imager PCE-PI 450 is a fully radiometric operating device for recording and display of temperature-based images and temperature-based profiles of the object in operates on. The thermal imager PCE-PI 450 does not only work with the latest technology due to its USB 2.0 interface, which allows a real-time thermographic imaging with 96 images per second and simultaneous image-recording with 32 Hz, but it also efficient due to stationary as well as portable application.


- Detector with 382 x 288 pixels
- Infrared imaging in real time with up to 80 Hz
- Excellent thermal sensitivity
- USB 2.0 interface

N.B. see the PCE-PI 400 for alternative thermal sensitivity and operating/storage temperature

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 10

The color meter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10nm wavelength increments with Reflectance Curve graph. 


- CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 10

The colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000E SST

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

 

- Weighing range : 6000 kg
- Readability : 2 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 10

The spectrophotometer PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10 nm wavelength increments with Reflectance Curve graph. 


CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
Test Instruments manufacturer