Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Air flow meter with 0 ... 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Air velocity meter with 0 ... 10 V output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Anemometer with 0 ... 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

The robust checkweighing scale is a real all-arounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibratable

The robust checkweighing scale is perfect for all general weighing tasks. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

Climate meter with 0 ... 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

The robust counting scales is a real all-arounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

 

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

 

The robust counting scales is perfect for all general weighing tasks. The stand of the Counting Scales can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibratable

Environmental meter with 0 ... 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental tester with 0 ... 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

The robust industrial scale is a real all-arounder. The stand of the industrial scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

The robust industrial scale is perfect for all general weighing tasks. The stand of the Laboratory Balance can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibratable

The robust inventory scale is a real all-arounder. The stand of the inventory scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

The robust inventory scale is perfect for all general weighing tasks. The stand of the Laboratory Balance can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibratable

The robust LAB Scale is a real all-arounder. The stand of the LAB Scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

The robust LAB Scale is perfect for all general weighing tasks. The stand of the LAB Scale can be easily separated along with the tripod mount from the platform and possibly mounted on the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long. P1 is 400 x 500 mm size.

- Weighing range: 15/30 kg
- Readability: 2/5 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibratable

The robust laboratory balance is a real all-arounder. The stand of the laboratory balance can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.

- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable