Products for 'Cámara termográfica PCE PI 450 '

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Material Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Roll Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Concrete Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Concrete Rebound Test Hammer PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

NDT Tester - Hardness Tester PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Surface Testing - Concrete Hammer PCE-HT-450

£ 1,320.00

Price excl. VAT &. delivery
2 year Warranty

The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle

Magnetic Stirrer PCE-MSR 450

£ 222.00

Price excl. VAT &. delivery
2 year Warranty

The magnetic stirrer is a stirring instrument for up to 20 liters. The speed of the magnetic stirrer can be adjusted. It is possible to set speeds between 200 and 2200 revolutions per minute.

- Motor: brushless DC motor (BLDC)

- Number of stirring points: 1

- Maximum stirring volume: 20 l

- Speed range: 200 ... 2200 rpm (adjustable)

- Accuracy: +/- 1 rpm

Voltmeter PCE-PI 10

£ 27.00

Price excl. VAT &. delivery
2 year Warranty

The voltmeter is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the voltmeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V

Digital Multimeter PCE-PI 10

£ 27.00

Price excl. VAT &. delivery
2 year Warranty

The digital multimeter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the digital multimeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V

Electrical Tester PCE-PI 10

£ 27.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the electrical tester is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V

Condition Monitoring Digital Multimeter PCE-PI 10

£ 27.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring digital multimeter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the condition monitoring digital multimeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V

Phase Rotation Meter PCE-PI 10

£ 27.00

Price excl. VAT &. delivery
2 year Warranty

The digital phase rotation meter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the phase rotation meter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V

Electrical Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Insulation Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The insulation tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the insulation tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Isolation Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The isolation meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the isolation meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

PAT Tester PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software

Photovoltaic Meter PCE-IT 150

£ 1,646.00

Price excl. VAT &. delivery
2 year Warranty

The photovoltaic meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the photovoltaic meter.

- Insulation resistance: 0 ... 30 TΩ

- Accuracy: ± (5% of Mw.+5 digits)

- Test voltage: 500 V ... 15 kV

- Direct alternating voltage: 30 ... 600 V

- Accuracy: ± (2.0% v.Mw. +3 digits)

- Polarisation index PI

- Dielectric absorption ratio DAR

- Memory and software