The radioactivity meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental meter PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The solar measuring device kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Solar measuring device PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

PCE-ATP 1 is a food safety / hygiene - ATP test instrument, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

• Performance
• Power factor
• AC voltage and current
• DC voltage and current, resistance and frequency
• Incl. Data Cable and Test Leads
• Software available in the accessories tab
• Incl. ISO Calibration Certificate

PCE-PCO 1 is a Aerosol particle counter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 … 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Carbon Monoxide, CO, 0 … 250 ppm)
• Additional display and alarm station
• ATEX or UL approval

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

PCE-RVI 1 is an analogue viscometer or dial reading viscometer used in industrial and research applications to measure the viscosity of fluids such as paints, lacquers, inks, pastes, adhesives, plastics, greases and liquid food products. Under identical conditions, test results from an analogue viscometer are as accurate and reproducible as results from a digital viscometer. Thus, the PCE-RVI 1 analogue viscometer offers an affordable solution for viscosity measurement during product and material testing, development, production and quality control.

• Rotational speed: 6, 12, 30, and 60 rpm
• Viscosity range: 10 … 100,000 mPa.s / cP
• Accuracy: ±5 % full scale (FS) in Newtonian fluids

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-H2S is a single-gas gas sensor used to warn for gases (Hydrogen sulfide, H₂S, 0 … 25 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Hydrogen sulfide, H₂S, 0 … 25 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O2 is a single-gas Oxygen Meter used to warn for gases (Oxygen, O₂, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Oxygen, O₂, 0 … 25 vol%)
• Additional display and alarm station
• ATEX or UL approval

The 1-Phase Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this ammeter either directly with the supplied test leads, or indirectly by current clamps.

• Performance
• Power factor
• AC voltage and current
• DC voltage and current, resistance and frequency
• Incl. Data Cable and Test Leads
• Software available in the accessories tab

The class 1 sound level meter meets all requirements for noise measurement and frequency analysis. This integrating precision pulse sound level meter complies with all applicable standards and guidelines.

• Accuracy class 1
• A, B, C & Z frequency weighting
• Fast, Slow, Impulse and Peak time weighting
• Statistics function
• 1/1 octave band included
• 1/3 octave band optional

PCE-PCO 1 is a Aerosol meter / Aerosol measuring device or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

Compact environmental tester for weather monitoring. Basic environmental tester with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 360°
• Output signal: 4 … 20 mA
• Assembly: pipe assembly / assembly via PG screw connection
• Heating: yes

PCE-PCO 1 is a handheld particle-counting air quality meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

PCE-PCO 1 is an airborne particle-counting hygiene meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 handheld particle counter:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust, 80 MB internal memory
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The Salt Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable Salt Meteris used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

• Measuring range: pH value: 0.00 … 14.00 pH
• Conductivity: 0 … 200 µS/cm, 0.2 … 2.0 mS/cm, 2 … 20.0 mS/cm, 20 … 200 mS/cm
• TDS: 0 … 132 ppm, 132 … 1320 ppm, 1320 … 13200 ppm, 13200 … 132000 ppm
• Oxygen: 0 … 20.0 mg/l 
• Temperature: 0 … 60.0 °C / 32 … 140 ºF
• 2 point calibration, pH4 + pH7

PCE-PCO 1 is a handheld laser optical particle counter, or dust particle measuring device, for measuring the concentration of particles in the air. The dust particle measuring device:

• Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
• Offers a robust 80 MB internal memory and microSD card slot
• Features a large, full-color LCD display with backlight
• Includes a built-in camera for image and video recording
• Contains sensors for measuring air temperature, dew point and relative  humidity
• Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The floor scale consists of the U-shaped weighing platform and the display unit connected via a 5 m long cable. Due to the U-shape, the floor scale can be easily loaded with an ant or a hand pallet truck.

• Measuring range [Max]: 1500 kg / 3306 lb
• Verification value [e]: 0.5 kg / 1.1 lb
• Usable area U-shape [WxD]: 800 x 1250 mm / 31.5 x 49.2"
• Interface: USB-B (bidirectional)
• Battery and mains operation possible
• Incl. verification (conformity-assessed)