- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries

- Range: 0 ... 19.99/ 0 ... 199/ y 0 ... 1999 Ω. and 0 ... 200 V AC 50/60 Hz
- Resolution: 10/ 100 mΩ / 1 Ω. and 0.1 V
- Accuracy: ± 2% + 2 positions and ± 3% + 2 positions.
- Lower measurement limit.: 0.01 Ω.
- Current of measurement: 2 mAeff / rms

Earth Tester / Earth Resistance Meter (resistance / voltage) is used to measure lightning-arresters or ground connection lightning-arresters for all types of buildings.

- Range: 0 ... 19.99/ 0 ... 199/ y 0 ... 1999 Ω. and 0 ... 200 V AC 50/60 Hz
- Resolution: 10/ 100 mΩ / 1 Ω. and 0.1 V
- Accuracy: ± 2% + 2 positions and ± 3% + 2 positions.
- Lower measurement limit.: 0.01 Ω.
- Current of measurement: 2 mAeff / rms

The Spectrophotometer PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the Spectrophotometer, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the Spectrophotometer PCE-CSM 5 comes with two different measuring apertures (Ø4 mm and Ø8 mm). After a measurement with the Spectrophotometer, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

 

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø4 mm and Ø8 mm). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

 

The color meter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the color meter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the color meter PCE-CSM 5 comes with two different measuring apertures (Ø6 mm and Ø10 mm).

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø4 mm and Ø8 mm). 

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures 6 and 10 mm
- Illumination/Viewing Angles 8°/d and CIE 10°

 

The paint test equipment was developed for quality control and offers a high accuracy. When using the paint test equipment, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the paint test equipment comes with two different measuring apertures (Ø4 mm and Ø8 mm). After a measurement with the paint test equipment, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.

- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

 

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer

The favorable calibrated Trade Approved scale PCE-PM ... T series is an almost unrivaled approved scale thanks to its features and options. The Trade Approved balance has a counting function, an RS-232 interface and a sturdy plastic case. The calibrated Trade Approved scale is calibrated according to EU Class III.
    
- Weighing capacity: 300 g
- Readability: 0.1 g
- Weighing surface: ø 115 mm
- Verification value: 0.1 g
- Verifiable M III

The favorable Trade Approved scale PCE-PM ... T series is an almost unrivaled scale thanks to its features and options. The Trade Approved balance has a counting function, an RS-232 interface and a sturdy plastic case.
    
- Weighing capacity: 600 g
- Readability: 0.2g
- Weighing surface: 225 x 165 mm

The favorable Trade Approved scale PCE-PM ... T series is an almost unrivaled scale thanks to its features and options. The Trade Approved balance has a counting function, an RS-232 interface and a sturdy plastic case.
    
- Weighing capacity: 3000g
- Readability: 1g
- Minimum load: 20g

The favorable calibrated Trade Approved scale PCE-PM ... T series is an almost unrivaled approved scale thanks to its features and options. The Trade Approved balance has a counting function, an RS-232 interface and a sturdy plastic case. The calibrated Trade Approved scale is calibrated according to EU Class III.
    
- Weighing capacity: 6000g
- Readability: 2g
- Minimum load: 40g
- Verifiable M III

The PCE-DDM 5 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 5,000 kg / 50 kN / 11,023 lbs
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 5,000 kg / 50 kN / 11,023 lb
- Resolution: 2 kg / 20 N
- Minimum load: 40 kg / 88 lbs
- Supplied with remote control indicator