Industrial Measurement Products and Solutions
Order no.: PCE-PBM 100
The digital microscope impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the digital microscope is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

- Eyepieces: WF 10x wide field eyepieces
- Magnification: 4x, 10x, 40x, 100x
- 4 lenses up to 100x magnification
- LC Display 800 x 600 pixels
- Video output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PBM 100
The inspection camera impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and high reliability, the inspection camera is particularly well suited to be used in advanced teaching facilities as well as in laboratories.

- Eyepieces: WF 10x wide field eyepieces
- Magnification: 4x, 10x, 40x, 100x
- 4 lenses up to 100x magnification
- LC Display 800 x 600 pixels
- Video output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-5000-STAND

The PCE-5000-STAND test stand for the PCE-5000 hardness tester is used to support the automatic test probes. The test stand allows automated measurements, with a higher reproducibility of tubes and round material.

 

- Measuring stand for PCE-5000 hardness tester
- Support of automatic test probes

 

Automatic test probes and meter not included.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 10K
The dynamometer PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. The dynamometer PCE-DFG NF 10K can be purchased here in our online shop. 

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 20K
The dynamometer PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 20K here in our online shop. 

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 50K
The dynamometer PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the dynamometer PCE-DFG NF 50K here in our online shop. 

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 10K
The force gauge PCE-DFG NF 10K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. The force gauge PCE-DFG NF 10K can be purchased here in our online shop. 

- Measuring range: 0 ... 10 kN / 10,000 N / 2245 lbs
- Resolution: 1 N / 0.22 lb
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 20K
The force gauge PCE-DFG NF 20K with an external load cell is designed for the measurement of pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the force gauge PCE-DFG NF 20K here in our online shop. 

- Measuring range: 0 ... 20 kN / 20,000 N / 4,500 lbs
- Resolution: 2 N / 0.5 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG NF 50K
The force gauge PCE-DFG NF 50K with an external load cell is designed to measure pressure forces at hard-to-reach measuring points. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation. You can buy the force gauge PCE-DFG NF 50K here in our online shop. 

- Measuring range: 0 ... 50 kN / 50,000 N / 11,240 lbs
- Resolution: 5 N / 1.1 lbs
- Accuracy: ± 0.5% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200

The Handheld Roughness Tester is used to determine surface roughness. The compact surface roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The handheld roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor

- "SWISS MADE" measurement mechanism 
- Accuracy <± 10% and Repeatability <6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200
The Material Surface Roughness Tester PCE-RT 1200 is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material surface roughness tester PCE-RT 1200 is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200
The profilometer PCE-RT 1200 is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer PCE-RT 1200 is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200
The Surface Testing - Roughness Tester PCE-RT 1200 is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The surface testing - roughness tester PCE-RT 1200 is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10

The PCE-DDM 10 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum (see accessories for details).


- Max. capacity: 10 t / 22,046 lbs / 10,000 kg / 100,000 N / 100 kN
- Resolution: 5 kg / 50 N
- Selectable units: t / lbs / kg / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10

The PCE-DDM 10 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10

The PCE-DDM 10 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs 
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10

The Tension Dynamometer PCE-DDM 10 is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Dynamometer PCE-DDM 10 is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 10,000 kg / 100 kN / 22,046 lbs
- Resolution: 5 kg / 50 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 10

The PCE-DDM 10 Weighing Hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 10 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum (see accessories for details).


- Max. capacity: 10 t / 22,046 lbs / 10,000 kg / 100,000 N / 100 kN
- Resolution: 5 kg / 50 N
- Selectable units: t / lbs / kg / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ATP 1-KIT
The PCE-ATP 1-KIT is used to quickly and easily check the cleanliness of surfaces. The PCE-ATP 1 displays a measurement result on the large LC display after only 10 seconds. The PCE-ATP 1 internal memory stores up to 10,000 measured data sets with time and date.

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Enables rapid detection of bacterial or microbial residue
- Incl. 100 Test tubes (swabs)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ATP 1-KIT2
The PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of water. The  ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. 100 Test tubes (swabs) for surfaces
- Incl. 100 Test tubes (swabs) for water
Manufacturer: PCE Instruments
Test Instruments manufacturer