The thermometer PCE-CMM 10-ICA is a multi-function meter for measuring the air quality. This thermometer measures synchronously the CO2 concentration, the air temperature and the humidity.

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
- incl. ISO Calibration Certificate (for CO2 only)

The thermometer is an independent measuring device for determining temperatures between -40 ... 125 °C. The thermometer is therefore particularly suitable for monitoring particularly hot environments.

- Measuring range: -40 ... 125 °C / -40 ... 257 °F
- Measurement accuracy: ± 0.2 °C (0 ... +65 °C / 32 ... 149 °F)
- Resolution: 0.1 °C
- USB data logger
- Data export directly as PDF
- incl. ISO-Calibration Certifikate

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements

PCE-HVAC 3 is a thermometer, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the thermometer calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 thermometer.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

The innovatively designed thermometer is a large display for monitoring the indoor air quality. This thermometer is used specifically to monitor the indoor air quality in large rooms. These include, for example, meeting rooms, lounges, offices or public spaces such as classrooms or kindergartens.

- Measuring range CO2: 0 ... 9999 ppm
- Temperature measuring range: -10.0 ... 100.0 °C
- Humidity measuring range: 0 ... 99% r.h.
- Traffic light bar graph
- Acoustic, adjustable alarm

PCE-313A is a combination thermometer hygrometer used to measure the relative humidity (% RH) and temperature (°C / °F) of the air. Ideal for use in evaluating heating, ventilation and air conditioning (HVAC) system performance, this digital thermo-hygrometer also has a port for connecting a type-K thermocouple.

- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

The thermometer is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The thermometer has a SD card slot (from 1 to 16 GB) for storing the measured data.

- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- Sampling rate: 1/ sec.
- SD card memory (1 ... 16 GB)
- Incl. ISO calibration certificate

The PCE-779N-ICA thermometer measures temperatures quickly and without contact. The thermometer can be used for almost all surfaces. The emissivity of the thermometer is adjustable over the range of 0.1 ... 1.0. The thermometer has various measurement functions such as max, min and average measurement.

- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F
- incl. ISO Calibration Certificate

With the thermometer you can ensure the right climate in your office. The thermometer measures the CO2 content of the air, the relative humidity and the room temperature. The thermometer shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls
- incl. ISO Calibration Certificate (for CO2 only)

The thermometer has two measuring inputs. Each measuring input from the thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate

- Temperature measuring range: -10 ... 50 ° C
- Large CO2 measuring range up to 5000 ppm
- Traffic light function for carbon dioxide
- Measures humidity
- 5 h graph for long-term monitoring
- Battery and mains operation
- Suitable for classrooms, nurseries/kindergartens, lecture halls
- incl. ISO calibration certificate (for CO2 only)

With the PCE-890U thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The thermometer makes it easy to measure objects from a distance that are difficult to access.

- Measuring range: -50 ... 1150°C / -58 ... 2102°F
- Accuracy: ± 1.5% ± 2°C / 3.6°F (0 ... 500°C / 32 ... 932°F)
- Resolution: 0.1°C / 0.18°F (<1000°C)
- Emission level: 0.1 ... 1

The thermometer has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the thermometer also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate

PCE-VA 20 is a multifunction thermometer for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm

With the Thermometer PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the thermometer is 0 ... 500 °C / 32 ... 932 °F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the thermometer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500 °C / 32 ... 932 °F
- Accuracy: ± 1.5 °C or ± 1 %
- Optical resolution: 15:1
- Output signal: 4 ... 20-mA standard signal
- For fixed installation (mounting bracket incl.)