Industrial Measurement Products and Solutions
Order no.: PCE-USC 20

PCE-USC 20 is a portable or benchtop ultrasonic tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.


- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and
  reinforcing functions, export and reporting functions 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FD 20

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 250

PCE-TG 250 is a portable Thickness Meter with an easy-to-read 4-digit display. This ultrasound-based Thickness Meter uses a contact transducer (included) to measure the thickness of coated and uncoated ferrous and non-ferrous metal, glass, plastic, and other homogeneous materials including aluminum, brass, copper, iron, lead, nickel, steel, gold, titanium, pyrex and quartz glass, nylon, polyethylene, and silicone rubber.


- Measurement range: 1 mm ... 250 mm / 0.04 in ... 9.84 in (steel), 2.5 mm ... 20 mm / 0.1 in ... 0.79 in (coated surfaces)
- Accuracy: ± 0.01 mm / ± 3.94 mil
- Resolution: 0.01 mm / 0.1 mm, 0.39 mil / 3.94 mil
- Sound velocity: 1000 m/s ... 9999 m/s / 3280 ft/s ... 32805 ft/s

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 110

The thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal thickness meter for water pipes, steam pipes and pipes for chemicals. 


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in  (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 120

The thickness meter PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This thickness meter works to accurately measure the material thickness / wall thickness with ultrasound.


- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 100

The PCE-TG 100 is a compact ultrasonic thickness meter for homogeneous materials. This ultrasonic thickness meter PCE-TG 100 works with an external ultrasonic probe; this probe conducts ultrasonic waves into the material to be tested. Different materials conduct ultrasound at different speeds, so you can choose different ultrasonic speeds on the PCE-TG 100 Ultrasonic Thickness Meter.


- Measurement range: 0.8 mm ... 225 mm / 0.03 in ... 8.86 in (displays in mm only)
- Adjustable sound velocity
- Suitable for metals, glass, plastics
- 5 MHz probe
- External sensor
- Material thickness

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a dry film thickness (DFT) measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness meter automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H

PCE-CT 5000H is a dry film thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness meter or gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 65-ICA

PCE-CT 65 is a dry film thickness (DFT) meter that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness meter is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % ±2 µm for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % ±0.08 mils for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 65

PCE-CT 65 is a dry film thickness (DFT) meter that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % ±2 µm for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % ±0.08 mils for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory

Manufacturer: PCE Instruments
Test Instruments manufacturer