NDT Test Instruments PCE-VE 200-KIT2
£ 730.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VE 200 is a car measuring device or inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The car measuring device provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Automotive Tester
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Clamp Meter
This Clamp Meter has been developed to determine indirectly, the the AC/DC currents with high accuracy. A non-contact clamp meter and a torch to illuminate the area being measured, have been integrated into this device. The small size of this  Clamp Meter, makes it possible to use in small spaces with limited access.

- 4 digit LCD display with backlighting
- save function
- DCA zero rest function
- current tester, non-contact
- integrated light to illuminate measured area
- automatic range selection
- automatic disconnect
- clamp diameter: 18 mm 

 

NDT Test Instruments PCE-VE 200-KIT1
£ 711.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VE 200 is a car measuring device for nondestructive evaluation (NDE) and machine diagnostics. The car measuring device provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Air Flow Meter
The air flow meter PCE-VA 20-set is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm large impeller head optimally.

- incl. Flow hood
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- HOLD function
- Low battery indicator 

 

NDT Test Instruments PCE-DDA 10-ICA incl. ISO Calibration Certificate
£ 699.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 hardness tester is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to pc
- Incl. ISO Calibration Certificate

NDT Test Instruments PCE-DDD 10-ICA incl. ISO Calibration Certificate
£ 694.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-DDD 10 shore hardness tester is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.


- Handheld device
- For Shore D measurements
- Single and Serial measurements
- Data transfer to PC
- Incl. ISO Calibration Certificate

NDT Tester - Hardness Tester PCE-HT 224E with Digital Display
£ 676.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The NDT Tester is a measuring tool for testing the strength of concrete. The NDT Tester measures strength according to the Schmidt principle. According to this measurement method, the quality of concrete can be measured with the NDT Tester.  The NDT Tester is also suitable for measuring hardness of rolled paper.  The NDT Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm².

- Measuring range: 10 ... 100 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
Data storage
- Rechargeable battery
NDT Test Instruments PCE-PGM 60-ICA incl. ISO calibration certificate
£ 675.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate
- Includes PC-compatible software for detailed analysis

NDT Tester - Gloss Meter PCE-GM 80-ICA incl. ISO Calibration Certificate
£ 667.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

- Measurement geometry: 60°
- Measuring range up to 1000 GU
- Measuring surface: Ø 4.5 mm
- Data storage: 1245 measured values
- Interface: Micro USB
- Incl. ISO calibration certificate
NDT Test Meter / Belt Tension Meter PCE-BTM 2000L-ICA incl. ISO Calibration Cert.
£ 645.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The NDT test meter / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The NDT test meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 25 cm / 9,8 in
- incl. ISO Calibration Certificate
NDT Tester - Gloss Meter PCE-GM 75-ICA Incl. ISO Calibration Certificate
£ 620.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The NDT tester - gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

- Measuring range up to 1000 GU
- For measurements on small surfaces
- Precise measurements thanks to high accuracy
- Micro-USB interface for the PC connection
- Data memory for later evaluations
- Data memory: 1,245 measured values
- Incl. ISO calibration certificate
NDT Test Meter / Belt Tension Meter PCE-BTM 2000A-ICA incl. ISO Calibration Cert.
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The NDT test meter / belt tension meter is an optical measuring instrument for determining the belt tension force. This force measuring device consists of a display unit and a sensor on a gooseneck cable. The NDT test meter measures the tension of the belt in a stationary state.

- Measures the oscillation frequency of the belt
- Measuring range: 10 ... 900 Hz
- Accuracy: ± (1% of rdg. + 4 digits)
- Resolution: <100 Hz: 0.1 Hz
                       >100 Hz: 1 Hz
- Memory for 750 measured values
- Length of gooseneck sensor 16 cm
- incl. ISO Calibration Certificate
NDT Tester - Opacity Meter PCE-RM 100
£ 593.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester - opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces. The NDT tester - opacity meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings. 

- Measuring range: 0 ... 100 (0 is transparent and 100 is fully opaque)
- Optical measurement angle: 45º degree angle
- Measuring accuracy: ± 1
- Resolution: 0.1
- Battery operation
- Interface and software
NDT Tester PCE-2500N
£ 578.00
Price excl. VAT &. delivery
2 year Warranty

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

- Measuring principle: Leeb Rebound method
- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
- Accuracy: ± 0.5%; Repeatability: ± 0.8%
Type D impact device

NDT Test Instruments PCE-HT-75
£ 573.00
Price excl. VAT &. delivery
2 year Warranty
Topseller

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


- Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
- Measuring range: 10 ... 70 N/mm²
- Energy: 0.735 J / 0.54 ft-lbs
- Low strength concrete testing or Type L
- Indication of measurement: 0 to 100 (without dimensions)
- Maximum thickness of concrete (of the material): 70 cm

NDT Test Instruments PCE-CT 28-ICA incl. ISO Calibration Certificate
£ 563.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate

NDT Test Instruments PCE-DDA 10 Shore A
£ 560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to PC

 

NDT Test Instruments PCE-DDD 10 Shore D
£ 560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore D measurements
- Single and Serial Measurements
- Data transfer to PC

 

NDT Test Instruments PCE-VE 200-S3
£ 552.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VE 200-S3 is a car measuring device, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This car measuring device provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


- 3.7 mm / 0.14 in diameter
- 3 m / 9.8 ft cable length
- 1600 x 1200 pixels JPEG image / 640 x 480 pixels AVI video

 

NDT Tester - Gloss Meter PCE-PGM 60
£ 552.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PGM 60 is a portable handheld NDT tester or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm