Industrial Measurement Products and Solutions
Order no.: PCE-VM 31-HAWB

The PCE-VM 31-HAWB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TU 3

PCE-TU 3 is a vibration analyzer laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.


- Max. 10 m / 32.8 ft distance between sensors
- Accuracy: ± 1 % + 0.001
- Resolution: 0.001 mm / 0.1°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 504

The wireless PCE-VMS 504 Vibration analyzer detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless Vibration analyzer therefore features external vibration sensors, which measures vibrations at machines to transfer those wireless to a receiving unit.


- Acceleration range: up to 300 m/s²
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Data memory (receiving base) 128 MB

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 40C

The PCE-VM 40C Vibration analyzer with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration analyzer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Vibration analyzer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem, warning and alarm leds, relay output, SMS alerts, and an internal battery. 


- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications

- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-WB

The PCE-VM 31-WB Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VC21

PCE-VC21 is a vibration analyzer calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with adjustable quartz-stabilized vibration frequencies between 15.92 and 1280 Hz and adjustable vibration amplitudes between 1 m/s² and 20 m/s².


- Load-independent vibration magnitude
- 7 adjustable vibration frequencies
- 5 adjustable vibration amplitudes

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see   
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HAV 100
The vibration analyzer is a versatile hand-arm vibration meter. The main feature of the vibration analyzer is the human vibration exposure assessment according to the ISO standards ISO 8041: 2005 and ISO 5349: 2001.

Measuring range:
- Low: 0.05 ... 200.0 m/s² / 0.005 ... 20.4 g
- High: 0.50 ... 2000.0 m/s² / 0.05 ... 204.0 g
- Linear operating range: 72 dB
- Frequency weighting: Hand Arm Filter
- Vibration sensor: ACM-PCE-HAV 100, 10 mV/g
- Memory: 992 readings
- Factory certificate

- Upgrade to professional analysis software (optional)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 20
The vibration analyzer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration analyzer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m / s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm / s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 5000

The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 25

The PCE-VM 25 Vibration analyzer is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration analyzer can be used for the measurement of a large range of parameters including acceleration, velocity and displacement.


- Vibration velocity range 10 Hz ... 10 kHz, displacement to 60 mm
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 501

The wireless PCE-VMS 501 Vibration Analyzer Sensor detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless vibration sensor, which measures vibrations at machines to transfer those wireless vibrations to a receiving unit.


- Acceleration range: up to 300 m/s2
- Wireless communication via ZigBee
- Frequency range between 5 Hz and 10 kHz
- Wireless transferring Piezo sensors
- Transmission rate of 1 minute per sensor

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VMS 100
This PCE-VMS 100 vibration analyzer is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. 

- Digital indicator and vibration sensor for predictive maintenance
- PCE-DPD-U: Universal power supply 18… 265V AC (50 / 60Hz) / DC; 14 mm red 4-digit LED display
- PCE-AC420-210 sensor: Measuring range 0.2 ... 20 mm / s; Linear frequency range (± 3 dB) 10 ... 1000 Hz; Degree of protection IP67
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 3700S
The vibration analyzer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration analyzer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Includes needle sensor and handgrip
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 204

PCE-VT 204 is a multifunction handheld vibration analyzer with the ability to accurately measure both rotation and vibration. An ideal tool for the testing and inspection of machine parts and components such as motors, transmissions, gears, gear boxes and wheels, this multi-purpose device measures revolutions per minute (RPMs) as well as three-axis vibration, i.e., speed or velocity, displacement and acceleration.


- Vibration measurement: Velocity or speed, acceleration and displacement
- RPM measurement: Contact / mechanical and noncontact / optical
- Internal memory for up to 1000 readings
- Min / max and data hold functions
- RS-232 port

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 3D

The PCE-VM 3D Vibration Analyzer provides quick and simple measurements of acceleration and displacement to check the acceleration of machines and construction parts, allowing for defects and larger unbalances to be determined. The PCE-VM 3D Vibration Analyzer is able to record vibration in three dimensions: on the x-, y-, and z- axes. The large display of the PCE-VM 3D Vibration Analyzer allows capturing momentary values as well as recording a whole vibration spectrum.


- Vibration acceleration: 0.1 m/s² ... 400.0 m/s² (Peak); (0 ... 40 g force)
- Vibration velocity: 0.01 ... 400.0 mm/s
- Vibration amplitude: 0.001 mm ... 4.000 mm (Peak-Peak)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDR 10

PCE-VDR 10 is a single-axis accelerometer or vibration analyzer with real-time measurement and data logging capabilities. This vibration monitor records acceleration (m/s, g, ft/s) as well as speed (mm/s, cm/s, in/s) measurements and saves the measured data to an included SD card memory.


- Acceleration measuring range:
  0.5 ... 199.9 m/s, 0.05 ... 20.39 g, 2 ... 656 ft/s
- Speed measuring range:
  0.5 ... 199.9 mm/s, 0.05 ... 19.99 cm/s, 0.02 ... 7.87 in/s
- Frequency range: 10 ... 1000 Hz
- Analog output: 4 ... 20 mA
- RS-232 and USB interface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 3700
The vibration analyzer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration analyzer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display.

Measuring ranges
- Acceleration: 0.0 ... 399.9 m/s²
- Velocity: 0.00 ... 399.9 mm/s
- Displacement: 0.000 ... 3.9 mm
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- factory calibration certificate with data
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2800

The PCE-VT 2800 Vibration Analyzer measures acceleration, oscillation speed and shift of vibrating parts, machines and equipment. The device features an integrated data logger to record vibration measurements over time. Measurement data is stored on an SD card memory and can be transferred directly to a PC via USB or RS-232 interface.


- Handheld instrument with vibration data logging function
- Frequency range: 10 Hz ... 1 KHz
- True-RMS (TRMS), max-hold, data-hold and peak-value functionality
- Adjustable sampling rate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer