The Gas Leak Detector PCE-LDC 10 is used in a wide range of industries. For example, the gas leak detector can help identify leaks in compressed air, gas, steam, vacuum and refrigeration systems as well as around door seals. The noise-cancelling headphones of the ultrasonic leak detector ensure that the device can be used successfully even in noisy environments.

- Working frequency: 40 KHz ± 2 KHz
- Leak detection using sound
- Rechargeable Li-ion battery

The TXgard-Plus-CO is a single-gas Gassensor used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 500 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-Plus-H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H₂S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen Sulfide, H₂S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-Plus-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 % vol), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 % vol)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

Single-Gas Gas Leak Detector warning for gases (for Methane CH₄), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Methane CH₄
- Additional display and alarm station
- ATEX approved

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H₂, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H₂, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H₂S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Hydrogen Sulfide, H₂S, 0 ... 50 ppm
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Carbon Monoxide, CO, 0 ... 500 ppm
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

This Gas Leak Detector is designed to detect formaldehyde in air. The Gas Leak Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Gas Leak Detector runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

- Measuring range: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.

- Sensor types: CH4 / H2S / CO / O2
- Easy one-button operation
- Rechargeable Li-ion battery
- ATEX II 2G EEx iad IIC T4 approved

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-IR-2 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO₂, 0 ... 2 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO₂, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-IR-3 is a single-gas Gas Leak Detector used to warn for gases (Inflammable Gases, 0 ... 100 % LEL), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Inflammable Gases, 0 ... 100 % LEL)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval