AED 1,518.00
Price excl. VAT &. delivery
The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.
Without a doubt, the main advantage of this handheld cup vane air flow meter is that it doesn't need to be held exactly in the direction of the wind. Air flow meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane air flow meter, wind direction will not influence the measurement.
The air flow meter measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow meter can measure the volume flow and the ambient temperature.
The Air Flow Meter PCE-VA 11 is an extensively used measuring instrument. This air flow meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.
PCE-VA 20 is a multifunction air flow meter for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.
The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.
PCE-VA 20-SET is a multifunction air flow meter with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the air flow device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.
This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless air flow meter station and outside sensors. The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.
The air flow meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The air flow meter PCE-PDA 10L has many different pressure measuring functions.
This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature.
PCE-HVAC 2 is a high-velocity multifunction air flow meter with a pitot tube. This portable air flow meter can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.
The PCE-HVAC 2 is a multifunction air flow meter with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile air flow meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-
The PCE-VA 20-SET is a multi-functional air flow meter including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.
PCE-MAM 2 is a lightweight portable handheld pocket-sized mini air flow meter, anemometer, wind speed meter or air velocity measuring device with an impeller wheel sensor that is ideal for determining air or wind speeds inside or out. This mini anemometer allows you to take velocity and temperature measurements quickly and on the spot.
Additional small air flow meter KWG 1 for PCE-Wind logger. Cup anemometer with impulse output.
This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless air flow meter station and outside sensors. The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.
The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.
The air flow meter has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the air flow meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless air flow meter station and outside sensors. The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.
The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.
The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment.
The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment.
The multifunction air flow meter determines the wind speed via an impeller with a diameter of 65 mm. The air flow meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.
The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.
The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.
Nowadays it is almost impossible to imagine technical specialists working without any auxiliary devices and measuring instruments. As against to the “old school pupils”, 
the technicians of the “new school” grow up with an idea that electronics and gauges are reliable and trustworthy. As one of the companies which loves technology and contributes a lot to the development and improvement of many existing instruments, we strive and work for progress and invention. Among the variety of our products you may find a series of airflow measuring products, which are definitely worth paying attention to. No matter how experienced the user is, we are going to cover a few important points proving that the role of the measuring instruments and in particular Air Flow Meters, is at certain moments of life, is indispensable. As the name states, the device is designed for measuring air flow. Yes, air is of vital importance not only for breathing and maintaining life, it is required for correct functioning of many devices, engines and systems. How quickly and sufficiently it flows, for example, inside, what value the flow rate stays at, how much it fluctuates, may influence the performance of the whole system in general, that is why it is important to predict the worst and carry out timely monitoring, by applying one of the airflow measuring devices.
Air flow should be measured in many industrial processes: in HVAC systems, combusting processes, operation of pneumatic systems with the compressed air inside, various ducts and pipes, etc. Depending on what your measuring task is, the choice of the most appropriate model of the air flow meter should be made. In each system, there are different current conditions, including temperature and its possible fluctuations, pressure, vibration, moisture content, and these factors should almost be taken into consideration when giving the preference to some particular air flow meter. Besides, the requirements for the desirable accuracy of the measurements must be clearly specified, as well as the limits for the general required volumetric flow. Unless you are an experiences user and know exactly what type of application you may need the device for, you are always welcome to contact our specialists which are ready to provide a consultation as well as to work on manufacturing a custom-specific device, which could meet your special requirements. One of the most popular and widely spread air flow measuring devices is based on the principle of “hot wire”. The first peculiarity about this type is that there are no moving parts, but it goes about temperature, and current and voltage are involved. It is very convenient for direct flow, which may be met in ducts, for example, and when the calculations can be carried out based on the given values of current, voltage, change of temperatures and flow velocity. They are perfect even for very small speeds and are quite cost-effective devices.
For the cases when the air flow is quite strong and continuous, a good option may be devices based on the vane principle. Because the vane inside must be moved by the air flow, they are not the best choice for ducts with very low-speed flows. For the systems where the air flow is likely to change the direction, the meter working on the principle of the cup device is the best suited, since such device carry out measurement without being affected by any changes in direction. Pitot tube principle is a very well familiar name and is good for the cases where the measurements are carried out with consideration of pressure differences (differential pressure) in the system. Mounting / installation of the sensor in your system is also not the least point to consider. Modern sensors may be put inside the most difficult-to reach places, in the smallest openings in the ducts, or even be just clamped on the particular part of the pipe where the monitoring should be carried out. Ultrasonic flow meters have become revolutionary in this sphere, substantially facilitating the measuring process, eliminating such problems as installation, interruption of the process and intrusion into the system.
An advantage of many modern devices is that besides measuring, they display the results immediately, store them and even may be connected with auxiliary sensors and devices, as temperature sensors (if required), data loggers, computers for further evaluation of the measurements. We may provide you with any model you might need, from the simple-to-operate meter to the measuring systems, provided with displays and sensors for professional inspection. It happens that the measurements should be carried out in hazardous and explosive environments, depending on that the design of the sensor should be carried out appropriately so that to provide a sufficient protection level. As any device, air flow meter, no matter, thermal, pressure, ultrasonic, vane etc., may be damaged and show faulty measurements. Here, a lot depends on the correct application and appropriate maintenance. 
Each particular type of meter is suitable for particular application better than the other models, in each system there is risk of contamination with dust and other particles present in the air, that is why we would like to specify, that if you have any problem making a decision yourself, do not hesitate to discuss your problem with one of our specialists at or +971 58 291 3437. Making the right choice and timely application of correct monitoring equipment provides long-time operation of your equipment and increase of the performance. The colleagues will ask you specific questions about your application and suggest the best suited products for the solution of your measurement task.
Not any single construction site can do without certain kinds of building machines and systems. 
As a rule, they are mobile and free-standing, and they can be transported from place to place where their application may be required. Cranes are usually big in size and height, and thus, it is clear that safety and stability should be set as a number one priority. Load lifting cranes are used not only in closed workshops, but also under the open sky, and it is clear that in this case they are under influence of not only operator, but also environmental conditions.
Either in operation or in non-working condition such equipment must be stable, even under the impact of different factors from outside, such as wind, vibrations etc. Correct installation and also consideration of all the factors, which possibly may influence the equipment, becomes a pledge of a successful operation and safety of the operators and workers.
A factor of stability, when calculated for “perfect conditions” (stability of the machine, main load) should as a rule, exceed 1, and is calculated as a ratio of the total moment of all the retention forces to the total moment of the tilting forces with respect to the tipping point. In real life, the operating conditions may turn out to be unpredictable and change in the process of operation, the influencing factors, like wind, may be very unstable and change with the time, from wind speed being equal to zero, to extreme gusts, exceeding the calculated limit value. In addition, the soil, on which machine is installed, e.g. may become uneven when too wet; the inert and tilting forces, wind load impact, may bring to overturn and fall of the cranes. That is why, besides the calculation for “ideal” conditions, it is necessary to carry out the calculations for unfavorable conditions, when additional loads arise. Thus, force of the wind pressure on the leeward surface, force of the wind pressure on the load surface, inert force when starting or stopping the mechanism of lifting the load, the centrifugal force of the load mass, generated by the rotation of the contraction etc. – all this should be taken into consideration. All these additional forces, arising in the process of operation and during the standstill position, may influence the moment of tiling.
From the one hand, the crane is an extremely heavy construction and it seems that wind cannot influence its operation extremely. From the other, underestimation of the wind force is the main mistake which can be made, since wind is a complex movement of the air masses, the speed and direction of which may change within a few seconds. The majority of people think that unless it goes about hurricane and thunderstorm, the “light” wind cannot be a problem. It is a pity, but, wind loads may have a disastrous influence, even without extreme weather conditions. Air is not an “empty” substance, it consists of many particles which are not seen by the human eye, nevertheless when it goes about huge masses of air and quick movements of the masses, the pressure they can exert as a result of the speed increase, may be tremendous.
Since the crane installed in the street is a construction of an impressive height, the wind may influence the controllability of the whole construction and certain parts of it, in particular load, cabin, cargo trolley and the whole crane. In reality, two kinds of influence may be pointed out: immediate or direct, when the crane is ruined or damaged by the wind, and indirect when the load which is lifted is moved not in the right direction and the equilibrium is lost. First, the bigger the height of the machine, the bigger the overturning moment becomes, since there is a big distance between the platform (ground) where the crane stands and the center of itself. Second, speed wind above the ground is much bigger than on the ground. That is why the higher the crane is the more the jib, the load and the cabin may be affected. In addition, it is necessary to remember that wind blows from different directions, from the side, from above, from below, exerting sometimes a way too great force on certain areas of the equipment and on the load. Wind may also change the surface on which the crane is installed, or create the waves in case of offshore equipment, which creates additional problem and difficulties and requires extra training and knowledge in order to prevent tragic outcomes.
Besides the crane itself, wind may influence the load and depending on the character, shape, weight of the load lifted and transported by the crane, the consequences may be quite dangerous as well. The load which under normal conditions would not cause any troubles, may start moving when influenced by the wind and the increase of the radius may lead to increase of the force exerted on the crane, and exceeding of the permissible limits, which results in overturn or load drop.
What can the crane resist the wind force? It depends on the crane and the parts it consists of. It is a complex structure and that is why the producer calculates attentively the loads which each part of the crane can withstand. Once the wind pressure (p) corresponding to a particular wind speed (vs) and the area of the construction which is exposed to the wind are known, the wind force can be calculated, and it is possible to find out which crane can be used for certain loads and under certain conditions. Of course, there are different accepted limits and the permissible wind speed used offshore, or onshore for very heavy loads in the docks is three times higher than the limit for smaller mobile cranes. It is expected that the latter should in reality have their jib lowered when the crane is not in operation, thus, avoiding unnecessary damage in case of strong wind.
The detailed explanation of the particular subject can be found in the regulations ISO 4302-1981 dedicated to wind load. Besides, the European legislation has been paying a lot of attention to improving the safety conditions and a few years ago EN 13000 European standard for mobile machinery came into force. Of course, the influence of nature of the working conditions is unpredictable, but if it is possible to improve the quality of equipment, and to provide education and training for operators on a high level, application of the modern auxiliary devices for monitoring, control and timely reaction in a hazardous situation, it is definitely worth taking it into consideration.
Figuratively speaking, wind may cause a “crane theft”, when the equipment is moved from its place, more than it is permissible. When it may happen is unpredictable, and to provide safe working conditions and avoid the damage of the crane, special sensors may be installed to block the work of some parts, depending on the problem arisen.
One of the auxiliary devices which has been designed to monitor the gusts of wind and their speed, is Air Flow Meter. To use is means to increase the safety of operation and predictability of the possible change of the environmental working conditions. As only the permissible limits are exceeded, the operator gets a signal, as well as the devices and sensors connected. It gives enough time to stop the operation, and take necessary measures of precaution, and, as they say, prevention is better than cure!
The necessary norms and regulations have been created, precise calculations for each particular model can be carried out, modern auxiliary sensors are provided to improve the working conditions and guarantee safety of the operators and personnel involved in the working process. And still, sometimes nature remains beyond the human control. If not to avoid, but to diminish the risks as much as possible, it is necessary not to neglect the all above mentioned measures which, in the long run, not only facilitate the working process, but help to avoid the damages and provide stability, even under the hazardous conditions.