The PCE-S 41 Vibration Analyser is battery powered and easy to use. This Vibration Analyser can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor, battery, carrying case
• Weight: 240 g, with battery

The PCE-S 41 Vibration Meter is battery powered and easy to use. This Vibration Meter can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

• With display
• Standard signal output
• Simple wall mounting
• RS-485 interface

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the humidity sensor . Air humidity and temperature are accurately determined in this compact humidity sensor via a semiconductor component. For commissioning, the humidity probe is supplied with a DC voltage. The measured values are output via a two-wire cable.

• With display
• Standard signal output
• Simple wall mounting
• RS-485 interface

The humidity sensor was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the humidity sensor are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

• Humidity measuring range: 0 … 100% RH
• Temperature measuring range: -20 … 60 °C
• Output: 4 … 20 mA
• Special Feature: Manual switchable analog value output

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

Screw-in sensor with T-handle for solid or frozen materials with 1m cable (removable)

• Tmax: 200 °C / 392 °F
• Accuracy: ± 1.5 °C
• Diameter: Ø 6.0 mm
• Length: 130 mm
• Thermocouple Type K

The car measuring device is battery powered and easy to use. This car measuring device can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

The PCE-S 41 Accelerometer is battery powered and easy to use. This Accelerometer can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency test range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290 mm sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

The PCE-S 41 Automotive Tester is battery powered and easy to use. This Automotive Tester can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• headphones, 70 mm sensor, 290mm sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions:  206 mm x 50 mm x 32 mm

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions: 206 mm x 50 mm x 32 mm

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions: 206 mm x 50 mm x 32 mm

The HVACR tester is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the HVACR tester. Air humidity and temperature are accurately determined in this compact HVACR tester via a semiconductor component. For commissioning, the HVACR tester is supplied with a DC voltage. The measured values are output via a two-wire cable.

• With display
• Standard signal output
• Simple wall mounting
• RS-485 interface

The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions: 206 mm x 50 mm x 32 mm

The Condition Monitoring Stethoscope is battery powered and easy to use. This Condition Monitoring Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor
• Weight: 240 g, with battery
• Dimensions: 206 x 50 x 32 mm

• WBGT: 0 ... 50°C / 32 ... 122°F
• Resolution: 0.1°C / 0.2°F
• Spherical temperature (TG): -20 ... 125°C / -4 ... 257°F
• Resolution: 0.1°C / 0.2°F
• Air temperature (AIR): -20 ... 125°C / -4 ... 257°F
• Resolution: 0.1°C / 0.2°F
• Dew point (DP): -20 ... 60°C / -4 ... 140°F
• Resolution: 0.1°C / 0.2°F
• Wet bulb temperature (WB): -20 ... 60°C / -4 ... 140°F
• Resolution: 0.1°C / 0.2°F
• Humidity (RH%): 0 ... 100%
• Resolution: 1%
• Data logger: 8 MB
• Data transfer: USB-C to PC

• Measuring range: 60 ... 100,000 FPM / 1 ... 1,666.66 Hz
• Resolution: 1 FPM / 0.01666 Hz
• Accuracy: ±0.002% of setting
• Mode: FPM, Hz
• Phase shift adjustable
• Brightness adjustable
• 16 bright LEDs

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by the Pt100 sensor in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.

• Power supply: 85 … 253 V AC / DC
• Sensor Input: for Pt100 sensor
• Measuring ranges: up to max. 600 °C (selectable)
• Output: Relay or SSR output (selectable) 

The HVAC meter is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

• conductivity: 0 … 20 µS/cm …
• salinity: 0.00 … 10.00 ppt
• temperature: 0 … 60 °C / 32 … 140 °F
• automatic temperature compensation
• internal 3-point calibration

The infrared HVAC meter is suitable for private and industrial use because of its price-performance ratio. An infrared HVAC meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity

The HVAC meter has a measuring range of -50 … +500 °C and an adjustable emission value between 0.10 … 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

• Measuring range: -50 … 500 °C / -58 … 932 °F
• Resolution: 0.1°C
• Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
• Spot ratio: 12:1
• Multipoint laser

The HVACR tester was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the HVACR tester are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.

• Humidity measuring range: 0 … 100% RH
• Temperature measuring range: -20 … 60 °C
• Output: 4 … 20 mA
• Special Feature: Manual switchable analog value output