• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

The earth tester / earth resistance meter is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the earth tester. The earthing resistance can be determined quickly with the earth resistance meter.

• Measuring range: 0 … 2000 Ω
• Measuring principle: Continuity test / earth resistance measurement
• Multi-coloured, backlit LCD
• Installation category III
• 50/60 Hz operating voltage

The heating mantle PCE-HM 100 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 100 ml and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 100 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.

• Power 100 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 100 ml

The heating mantle PCE-HM 250 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.

• Power 150 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 250 ml

The humidity detector is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity detector via the RS485 interface. In this compact humidity detector, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

The HVAC meter is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the HVAC meter via the RS485 interface. In this compact HVAC meter, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

The hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the hygrometer via the RS485 interface. In this compact hygrometer, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

The relative humidity meter is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the relative humidity meter via the RS485 interface. In this compact relative humidity meter, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• temperature range: 100 ... 450 °C
• heat-up time less than 5 s
• incl. 3 interchangeable fine soldering tips
• ergonomic design
• sleep and standby mode
• metal cap: can also be stowed away when hot

Ensure accurate, repeatable viscosity measurements with this flow cup viscometer test stand for use with PCE-125, PCE-127 and PCE-128 series flow cup viscometers. A must-have tool when conducting Ford, ISO or ASTM viscosity tests, this handy viscosity flow cup test stand:

• Affords hands-free viscosity measurement
• Allows for quick and easy height adjustment
• Features a built-in level for added convenience

The thermo hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the thermo hygrometer via the RS485 interface. In this compact thermo hygrometer, air humidity and temperature are precisely determined using a semiconductor component.

• Measuring range humidity: 0 … 100% RH
• Measuring range temperature: - 20 … 60 ° C
• Interface: RS 485 Modbus

• 5 detection modes
• Detection depth: min. 18 cm / 7.1 in
• Waterproof detection disc
• LCD display with illumination
• Adjustable telescopic rod: 68 ... 88 cm / 26.8 ... 34.6 in
• Adjustable volume and sensitivity
• Foldable

The Easycount-1-CEE-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-U energy meter are equipped with male and female connectors.

• Uncalibrated counter
• Voltage input: 230 VAC
• Current rating: 16 A
• Frequency: 50 HZ

The Easycount-1-Schuko-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-U energy meter are equipped with male and female connectors.

• Uncalibrated counter
• Voltage input: 230 VAC
• Current rating: 16 A
• Frequency: 50 HZ