Calibration Certificate for the temperature TL 305, PCE-T 300, P-700, various

ISO calibration certificate, e.g. to comply with your DIN ISO 9000. For this purpose, we give the measuring device to our in-house calibration laboratory. As the client, the measured values and the serial number are recorded in this ISO calibration certificate.

• 4 measuring points evenly distributed over the measuring range
• Calibration range: 30 … 500 °C
• Calibration applies to infrared sensors onlyN.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• Open-circuit voltage (Voc): 0 ... 60 V
• MPP voltage (Umpp): 0 ... 60 V
• Short-circuit current (Isc): 0 ... 30 A
• MPP current (Impp): 0 ... 30 A
• Maximum power (Pmax): 0 ... 800 W
• Temperature: 0 ... 60 °C / 32 ... 140 °F
• Including test leads

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• Open-circuit voltage (Voc): 0 ... 60 V
• MPP voltage (Umpp): 0 ... 60 V
• Short-circuit current (Isc): 0 ... 30 A
• MPP current (Impp): 0 ... 30 A
• Maximum power (Pmax): 0 ... 800 W
• Temperature: 0 ... 60°C / 32 ... 140°F
• Including test leads

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

Multimeter / TRMS Multimeter for measuring AC/DC current, AC voltage and resistance. This Multimeter / TRMS Multimeter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. 

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

• Open-circuit voltage (Voc): 0 ... 60V
• MPP voltage (Umpp): 0 ... 60V
• Short-circuit current (Isc): 0 ... 30 A
• MPP current (Impp): 0 ... 30 A
• Maximum power (Pmax): 0 ... 800 W
• Temperature: 0 ... 60°C / 32 ... 140°F
• Including test leads

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software