PCE-555 is a combination digital hygrometer and digital thermometer used to measure relative humidity or air humidity as well as air temperature, dew point temperature and wet-bulb temperature. This portable, handheld meter allows for quick and easy detection of environmental conditions. Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.

• Humidity measuring range: 0 … 100 % relative humidity (rh)
• Temperature measuring range: -30 … 100°C / -22 … 212°F
• Resolution: 0.01 % rh / 0.01°C or 0.018°F

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67

• Torque: 0.01 ... 100 Nm
• Resolution: 0.01 Nm
• Accuracy: ±2% FS / ±2.5% FS
• Units: Nm, kgf cm, lbf ft, lbf in
• Internal memory: 999 values
• Adjustable alarm

• Torque: 0.01 ... 60 Nm
• Resolution: 0.01 Nm
• Accuracy: ±2% FS / ±2.5% FS
• Units: Nm, kgf cm, lbf ft, lbf in
• Internal memory: 999 values
• Adjustable alarm

• Sound level: 35 ... 130 dBA
• Air velocity: 0.5 ... 30 m/s
• Volume flow: 150 ... 9000 CMM
• Light intensity: 0 ... 200 klux
• Temperature: -20 ... 60°C / -4 ... 140°F
• Humidity: 35 ... 80% r. h.
• Adjustable alarm for lux measurement
• Colored bar display

• DC voltage: 8 ... 30V
• DC current: 100 ... 2000 A (cold cranking)
• Starter and charging system test (12V / 24V)
• For lead-acid, AGM, gel and EFB batteries
• Rapid detection of faulty batteries
• Integrated reverse polarity protection
• Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
• USB data transfer
• Battery capacity 30 ... 200 Ah

• DC voltage: 8 ... 30V
• DC current: 100 ... 2000 A (cold cranking)
• Starter and charging system test (12V / 24V)
• For lead-acid, AGM, gel and EFB batteries
• Rapid detection of faulty batteries
• Integrated reverse polarity protection
• Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
• USB data transfer
• Battery capacity 30 ... 200 Ah

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24 in. Calibration is not available for this item.

• For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,  thermoplastic and more
• Measurement range: 0 … 100 Shore D
• Accuracy: ± 2 Hardness - Grade

The environmental tester is a small and handy measuring device for determining the differential air pressure. The environmental tester has a measuring range of ±5000 Pa. The environmental tester is connected via two hose connections with a diameter of 8 mm.

• Measuring range: ±5000 Pa
• 11 different pressure units:Pa, hPa, mBar, mmH2O, mmHg, inH2O, inHg, psi, ozin², bar, kPa
• Medium: gaseous
• Zero point calibration

• dose rate measuring range: 0 ... 10 mSv/h
• resolution: 0.01 µSv/h
• accuracy: ±30 % (for 137 Cs)
• sensitivity: 80 CPM/µSv (related to Co-60)
• cumulative dose: 0 µSv ... 500 mSv
• alarm adjustable: audible, visual, vibration

The PCE-HT 71N Environmental Tester detects air temperature and humidity and stores readings in its internal memory. The Environmental Tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a Environmental Tester in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The HVACR tester detects air temperature and humidity and stores readings in its internal memory. The HVACR tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a HVACR tester in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

• Infrared temperature range: -33 … +250 °C / -27 … +428 °F
• Probe temperature range: -55 … +330 ºC / -67 … +626 °F
• Resolution: 0.2 °
• IP 65 ingress protection rating allows hygienic cleaning

• Illuminance: 0 ... 65535 lx
• Resolution: 1 lx - Accuracy: ±7 % FS @25°C / 77°F
• Protection class: IP65
• Output: RS-485 Modbus RTU*

• Torque: 0.01 ... 100 Nm
• Resolution: 0.01 Nm
• Accuracy: ±2% FS / ±2.5% FS
• Units: Nm, kgf cm, lbf ft, lbf in
• Internal memory: 999 values
• Adjustable alarm

• Torque: 0.01 ... 60 Nm
• Resolution: 0.01 Nm
• Accuracy: ±2% FS / ±2.5% FS
• Units: Nm, kgf cm, lbf ft, lbf in
• Internal memory: 999 values
• Adjustable alarm

PCE-DD-D is a Shore D durometer or material hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

• For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,  thermoplastic and more
• Measurement range: 0 … 100 Shore D
• Accuracy: ± 2 Hardness - Grade

The HVAC meter is a small and handy measuring device for determining the differential air pressure. The HVAC meter has a measuring range of ±5000 Pa. The HVAC meter is connected via two hose connections with a diameter of 8 mm.

• Measuring range: ±5000 Pa
• 11 different pressure units:Pa, hPa, mBar, mmH2O, mmHg, inH2O, inHg, psi, ozin², bar, kPa
• Medium: gaseous
• Zero point calibration

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

• For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,  thermoplastic and more
• Measurement range: 0 … 100 Shore D
• Accuracy: ± 2 Hardness - Grade

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

• For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,  thermoplastic and more
• Measurement range: 0 … 100 Shore D
• Accuracy: ± 2 Hardness - Grade

PCE-555 is a combination digital hygrometer and digital thermometer used to measure relative humidity or air humidity as well as air temperature, dew point temperature and wet-bulb temperature. This portable, handheld meter allows for quick and easy detection of environmental conditions. Applications include monitoring climates of refrigerated trucks, warehouses, construction sites and HVAC installations, where excess moisture, condensation and uneven temperatures can create mold, spoilage and health hazards.

• Humidity measuring range: 0 … 100 % relative humidity (rh)
• Temperature measuring range: -30 … 100°C / -22 … 212°F
• Resolution: 0.01 % rh / 0.01°C or 0.018°F

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67