The temperature indicator is used for the signal processing of  4…20 mA. The temperature indicator offers a wide field of application due to the fact that its signal can be freely scaled. The temperature indicator has a 5-digit LED display to allow the user to directly read current measured values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel meter is used for the signal processing of 4 .. 20 mA. The panel meter has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The process indicator is used for the signal processing of 4 .. 20 mA. The process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

• IP65 protected front
• For thermocouples and resistance thermometers
• Configuration via software
• 5-digit LED display

The PCE-HT 71N Hygrometer detects air temperature and humidity and stores readings in its internal memory. The Hygrometer has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

• Measurement range: 0 … 100% RH / -35 … 70°C / -31 … 176°F
• Accuracy: ± 3% RH (20 … 80%) and  ± 5% / ± 1°C (1.8°F)
• Resolution: 0.5% RH / 0.1°C (0.18°F)
• Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

The manometer is a small and handy measuring device for determining the differential air pressure. The manometer has a measuring range of ±5000 Pa. The manometer is connected via two hose connections with a diameter of 8 mm.

• Measuring range: ±5000 Pa
• 11 different pressure units:Pa, hPa, mBar, mmH2O, mmHg, inH2O, inHg, psi, ozin², bar, kPa
• Medium: gaseous
• Zero point calibration

PCE-IR 100 is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.

• Infrared temperature range: -33 … +250ºC / -27 … 428ºF
• Probe temperature range: -55 … 330ºC / -67 … 626ºF
• Resolution: 0.2ºC / 0.36ºF
• IP 65 ingress protection rating allows hygienic cleaning

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

• AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

• DC voltage: 8 ... 30V
• DC current: 100 ... 2000 A (cold cranking)
• Starter and charging system test (12V / 24V)
• For lead-acid, AGM, gel and EFB batteries
• Rapid detection of faulty batteries
• Integrated reverse polarity protection
• Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
• USB data transfer
• Battery capacity 30 ... 200 Ah

PCE-IR 100 is both an infrared non-contact Pyrometer for measuring surface temperature and a contact Pyrometer with probe for measuring core temperature of food. This food-grade Pyrometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.

• Infrared temperature range: -33 … +250ºC / -27 … 428ºF
• Probe temperature range: -55 … 330ºC / -67 … 626ºF
• Resolution: 0.2ºC / 0.36ºF
• IP 65 ingress protection rating allows hygienic cleaning

PCE-0100 is a Salt Meter used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
  0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

• Resolution: 1 % or 0.001
• Accuracy: ±0.1 %

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz