This Milliohm Meter comes with a housing protected against water intrusion. With the Milliohm Meter PCE-MO 2002 Series you can measure from 100 μΩ up to 2000 Ω. With this Milliohm Meter measurement values are displayed by means of a LCD display with 3.5 digits and a good readability.

• Measuring ranges / resolution: 5 ranges, 0 … 200 mΩ / 0 … 2000 Ω
• Accuracy: ± 0.5% of reading 
• Max. Output voltage: (C1-C2) 20 V
• Power source 12V DC
• incl. ISO-Calibration certificate

This Milliohm Meter comes with a housing protected against water intrusion. With the Milliohm Meter PCE-MO 2002 Series you can measure from 100 μΩ up to 2000 Ω. With this Milliohm Meter measurement values are displayed by means of a LCD display with 3.5 digits and a good readability.

• Measuring ranges / resolution: 5 ranges, 0 … 200 mΩ / 0 … 2000 Ω
• Accuracy: ± 0.5% of reading
• Max. Output voltage: (C1-C2) 20 V
• Power source 12V DC
• incl. ISO-Calibration certificate

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min. and max. value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

• bright 8 high power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 9150 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• incl. ISO-Calibration Certificate

• measurement range: 0 µΩ to 6000 Ω
• resolution: 1 µΩ
• accuracy: ± 0.25 % of Rd + 25 digits
• test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
• pass/fail display
• calculation of the cable length

• measurement range: 0 µΩ to 6000 Ω
• resolution: 1 µΩ
• accuracy: ± 0.25 % of Rd + 25 digits
• test current: 10 A, 1 A, 100 mA, 10 mA, 1 mA
• pass/fail display
• calculation of the cable length

• bright 8 high power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 9150 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• incl. ISO-Calibration Certificate

The Cleanroom Dust Meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The Cleanroom Dust Meter PCE-PDA 01L has many different pressure measuring functions.

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

The Cleanroom measuring device PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The Cleanroom measuring device PCE-PDA 01L has many different pressure measuring functions.

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

• bright 8 high power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 9150 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• incl. ISO-Calibration Certificate

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and max value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

The differential pressure meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The differential pressure meter PCE-PDA 01L has many different pressure measuring functions.

• Measuring range: ± 200 Pa / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

Due to its compact design, the PCE-2550 durometer is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the durometer PCE-2550 is versatile.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.4%, Repeatability: ± 0.6%
• Impact Device: Type D
• Measuring Direction: 360°
• Internal measured value memory

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak tester 
• Temperature measurement, flow measurement

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

• bright 8 high power LEDs
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• 9150 lux at 30 cm / 1000 Hz
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment using x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• incl. ISO-Calibration Certificate

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

Due to its compact design, the PCE-2550 hardness tester is easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the hardness tester PCE-2550 is very versatile.

• Measuring ranges: 170 … 960 HLD
• Measurement direction: 360°
• Impact device: Type D
• Measurement units: HL, HB, HRB, HRC, HRA, HV, HS
• Internal measurement memory

The HVAC meter PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The HVAC meter PCE-PDA 01L has many different pressure measuring functions.

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

• Measuring range: 0 ... 20000 µW/cm²
• Resolution: 0.1 µW/cm²
• Accuracy: ±4 μW/cm² (0 ... 50 μW/cm²)
• Accuracy: ±8 % of reading (50 ... 20000 μW/cm²)
• Spectral range: 230 nm to 280 nm
• Data storage for 9 data records
• Energy measurement in μJ/cm²
• PC software
• for UVC lamps

The manometer PCE-PDA 01L is a reliable differential pressure gauge for pressure measurement of gases in the range of ± 200 Pa. The manometer PCE-PDA 01L has many different pressure measuring functions.

• Measuring range: ± 200 Pa  / 0.029 psi / 0.002 bar
• Resolution: 0.1 Pa / 0.0000145 psi / 0.000001 bar
• Accuracy: ± 1% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.4%, Repeatability: ± 0.6%
• Impact Device: Type D
• Measuring Direction: 360°
• Internal measured value memory

Due to its compact design, the PCE-2550 metal hardness tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the metal hardness tester PCE-2550 is versatile.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.4%, Repeatability: ± 0.6%
• Impact Device: Type D
• Measuring Direction: 360°
• Internal measured value memory