Zum Hauptinhalt springen
Dynamometer PCE-DFG 200 X
AED 3,887.00
Price excl. VAT &. delivery
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches.

  • Measuring range: 0 … 200 N
  • Resolution: 0.1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Force Gauge PCE-DFG 200 X
AED 3,887.00
Price excl. VAT &. delivery
The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces up to 200 N.

  • Measuring range: 0 … 200 N
  • Resolution: 0.1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
1-Phase-Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


  • Performance
  • Power factor
  • AC voltage and current
  • DC voltage and current, resistance and frequency
  • Incl. Data Cable and Test Leads
  • Software available in the accessories tab
  • Incl. ISO Calibration Certificate

Automotive Tester PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Automotive Tester PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Automotive Tester allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Car Measuring Device PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Car Measuring Device PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Coating Thickness Gauge PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Condition Monitoring Stroboscope PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Handheld Tachometer PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Industrial Scales PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery
The industrial scales PCE-SD 33C are low-costrobustverifiablesystembalances.Thecalibration of theindustrial scales is according to thetradingclassM III. The sturdyfoundationof theindustrial scalesis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Inventory Scale PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery

The inventory scale PCE-SD 33C is a low-cost robust verifiable system balance. The calibration of the inventory scale is according to the trading class M III. The sturdy foundation of the inventory scale is made of painted steel and features a plastic-coated steel platform.


  • Weighing capacity: 30 kg
  • Readability: 10 g
  • Platform size: 500 x 600 mm
  • Calibration value: 10 g
  • Certifiable: M III

Material Tester PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Material Thickness Meter PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Thickness Tester PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Parcel Scale PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery
The parcel scale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theparcel scale is according to thetradingclassM III.The sturdyfoundationof theparcel scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Platform Scale PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery
The platformscale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theplatformscale is according to thetradingclassM III.The sturdyfoundationof theplatform scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Portable Power Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


  • Performance
  • Power factor
  • AC voltage and current
  • DC voltage and current, resistance and frequency
  • Incl. Data Cable and Test Leads
  • Software available in the accessories tab
  • incl. ISO Calibration Certificate

Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration

The Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


  • Performance
  • Power factor
  • AC voltage and current
  • DC voltage and current, resistance and frequency
  • Incl. Data Cable and Test Leads
  • Software available in the accessories tab
  • Incl. ISO Calibration Certificate

Power Quality Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


  • Performance
  • Power factor
  • AC voltage and current
  • DC voltage and current, resistance and frequency
  • Incl. Data Cable and Test Leads
  • Software available in the accessories tab
  • incl. ISO Calibration Certificate

Rotation Meter PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Rotation Meter allows you to set the flash frequency in both FPM and Hz.

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Shipping Scale PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery
The shipping scale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of theshipping scale is according to thetradingclassM III.The sturdyfoundationof theshipping scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Stroboscope / Stroboscope Light PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm.

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Surface Tester PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Tachometer PCE-LES 303UV-365-ICA incl. ISO-Calibration Certificate
AED 4,048.00
Price excl. VAT &. delivery
ISO Calibration
Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 1731 μW/cm² at a distance of 30 cm. The Tachometer allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • external trigger input and output
  • route measurement
  • slow motion mode
  • incl. ISO-Calibration Certificate
Thickness Gauge PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Thickness Meter PCE-CT 80-FN2D5
AED 4,048.00
Price excl. VAT &. delivery
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Trade Approved Scale PCE-SD 153C
AED 4,048.00
Price excl. VAT &. delivery
Verification for Trade / conformity assessment
The trade approved scale PCE-SD153Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 150 kg
  • Readability:50g
  • Platform size: 500 x600mm
  • Calibration value:50 g
  • Certifiable:M III
Trade Approved Scale PCE-SD 303C
AED 4,048.00
Price excl. VAT &. delivery
Verification for Trade / conformity assessment
The trade approved scale PCE-SD303Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 300 kg
  • Readability:100g
  • Platform size: 500 x600mm
  • Calibration value:100 g
  • Certifiable:M III
Trade Approved Scale PCE-SD 33C
AED 4,048.00
Price excl. VAT &. delivery
Verification for Trade / conformity assessment
The trade approved scale PCE-SD33Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III.The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.

  • Weighing capacity: 30 kg
  • Readability:10g
  • Platform size: 500 x600mm
  • Calibration value:10 g
  • Certifiable:M III
Trade Approved Scale PCE-SD 63C
AED 4,048.00
Price excl. VAT &. delivery
Verification for Trade / conformity assessment
The trade approved scale PCE-SD 63Cisa low-costrobustverifiablesystembalance.Thecalibration of thetrade approved scale is according to thetradingclassM III. The sturdyfoundationof thetrade approved scaleis made of paintedsteel andfeatures a plastic-coated steelplatform.
  • Weighing capacity: 60 kg
    - Readability: 20g
    -Platform size: 500 x 600mm
    -Calibration value: 20 g
    -Certifiable: M III
Air Quality Meter Gasman-O3 "Ozone"
AED 4,037.51
Price excl. VAT &. delivery

The Air Quality Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


  • For O3 (Ozone)
  • Dust and water resistant - IP 65/67
  • 0 … 1 ppm
  • Non-rechargeable, 1-year battery

Gas Detector Gasman-O3 "Ozone"
AED 4,037.51
Price excl. VAT &. delivery

The Gas Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


  • For O3 (Ozone)
  • Dust and water resistant - IP 65/67
  • 0 … 1 ppm
  • Non-rechargeable, 1-year battery 

Gas Leak Detector Gasman-O3 "Ozone"
AED 4,037.51
Price excl. VAT &. delivery

The Gas Leak Detector Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement.


  • For O3 (Ozone)
  • Dust and water resistant - IP 65/67
  • 0 … 1 ppm
  • Non-rechargeable, 1-year battery

Ozone Meter Gasman-O3
AED 4,037.51
Price excl. VAT &. delivery

The Ozone Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Ozone Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Ozone Meter fulfills all the European and international norms, even ATEX and UL standards.


  • For O3 (Ozone)
  • Dust and water resistant - IP 65/67
  • 0 … 1 ppm
  • Non-rechargeable, 1-year battery