Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

• AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display

• accuracy class 2
• automatic range: 30 ... 130 dB
• manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
• frequency weighting A and C
• numerical values and traffic light display

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• Flow rate: 56 ... 68 l/min
• Connection: 1/4 inch
• For common refrigerants e.g. R12, R22, R134a ...etc.
• Motor power: 0.25 hp (180 W)
• Filter element to reduce oil mist

• Wind speed: 0.06 ... 45 m/s
• Resolution: 0.001 m/s
• Accuracy: ±(2% v.Mw. +0.2)
• Volume flow: 0 ... 9,999 m³/min
• Resolution: 0.001 m³/min
• Accuracy: ±(2 % of the standard value +0.2)
• Air temperature: 0 ... 45°C / 0 ... 113°F
• Resolution: 0.1°C / 32.18°F
• Accuracy: ±2°C / 3.6°F
• Micro-USB interface
• Software for data transfer
• Memory for 1000 measured values

PCE-010 is a handheld refractometer used to determine the % Brix (sucrose or sugar content) of low-concentration translucent liquids such as fruit and vegetable juices, maple sap and industrial coolants. This portable pocket Brix refractometer is specially designed to provide high-accuracy readings.

• Measurement range: 0 … 10 % Brix
• Resolution: 0.1 %
• Accuracy: ±0.1 %

This Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.

• Easy operation
• No batteries required
• Robust alligator clips for easy connection
• 3-phase measurements of 40 … 690 V AC
• Protection class IP 40

• Wind speed: 0.06 ... 45 m/s
• Resolution: 0.001 m/s
• Accuracy: ±(2% v.Mw. +0.2)
• Volume flow: 0 ... 9,999 m³/min
• Resolution: 0.001 m³/min
• Accuracy: ±(2 % of the standard value +0.2)
• Air temperature: 0 ... 45°C / 0 ... 113°F
• Resolution: 0.1°C / 32.18°F
• Accuracy: ±2°C / 3.6°F
• Micro-USB interface
• Software for data transfer
• Memory for 1000 measured values

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

• Signal converter for RTD
• Power supply via electricity loop
• Low installation width 

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

• Signal converter for RTD
• Power supply via electricity loop
• Low installation width 

• HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
• TVOC: 0 ... 10 mg/m³
• Temperature: 0 ... 50°C / 32 ... 122°F
• Relative humidity: 10 ... 90%
• Acoustic alarm
• Integrated rechargeable battery
• Internal memory

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC at 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

Mini Clamp Meter for measuring AC current, AC voltage, DC current and frequency. The Clamp Meter is designed to indirectly detect AC/DC current and frequency. The Clamp Meter has one white LED which illuminates the point of measurement. Users can test the voltage without contact. The small dimensions of this test instrument allow to take measurements in places with limited access. The Clamp Meter is delivered manufacturer calibrated and can be certified according to ISO.

• AC current(50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8  digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Mini Multimeter / TRMS Multimeter for measuring AC current, AC voltage, DC current and frequency.

• AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The PCE-MM 800 microscope is designed to display simple magnifications on a computer screen. For this purpose, the PCE-MM 800 microscope is connected to a screen. This allows a large presentation visible by several people. 

• 200 … 1600-times magnification
• Bright LED lighting
• Maximum display: 1600 x 1200 pixels
• USB interface
• Digital zoom

• Flow rate: 56 ... 68 l/min
• Connection: 1/4 inch
• For common refrigerants e.g. R12, R22, R134a ...etc.
• Motor power: 0.25 hp (180 W)
• Filter element to reduce oil mist