• Measuring ranges: HV 20 ... 999, HRC 15 ... 80
• Measuring ranges: HB 20 ... 999, HRB 20 ... 120
• Resolution: 1 (HV, HB) 0.1 (HRC, HRB)
• Accuracy: ±3 % (HV, HB), ±1.5 (HRC, HRB)
• Measuring directions: 360°
• TFT colour display
• Memory for 150 measured values
• Averaging: 3, 5, 10 measurements
• Result display with tolerance evaluation
• UCI calibration
• Test standard ASTM A1038
• Includes 50 N probe

The NDT test Instrument PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This NDT test Instrument captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

The two-way optics is a great advantage of the PCE-VE 1014N-F NDT test instrument or inspection camera. There is easy control of the camera head with the NDT test instrument. The NDT test instrument allows you to capture images and videos, and the videos are also stored with an audio recording. 

• Cable length: 1.5 m / 4.9 ft
• Camera head: 2-way
• Diameter: 4.5 mm / 0.18 in
• Resolution: 640 x 480 Pixel
• Storage of pictures and videos
• 8 GB memory card incl.
• LED lighting

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Torque: 0 ... 50 Nm 0 ... 37 ft-lb
• Resolution: 0.001 Nm / 0.0007 ft-lb
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• Measuring ranges: HV 20 ... 999, HRC 15 ... 80
• Measuring ranges: HB 20 ... 999, HRB 20 ... 120
• Resolution: 1 (HV, HB) 0.1 (HRC, HRB)
• Accuracy: ±3 % (HV, HB), ±1.5 (HRC, HRB)
• Measuring directions: 360°
• TFT colour display
• Memory for 150 measured values
• Averaging: 3, 5, 10 measurements
• Result display with tolerance evaluation
• UCI calibration
• Test standard ASTM A1038
• Includes 50 N probe

• Measuring ranges: HV 20 ... 999, HRC 15 ... 80
• Measuring ranges: HB 20 ... 999, HRB 20 ... 120
• Resolution: 1 (HV, HB) 0.1 (HRC, HRB)
• Accuracy: ±3 % (HV, HB), ±1.5 (HRC, HRB)
• Measuring directions: 360°
• TFT colour display
• Memory for 150 measured values
• Averaging: 3, 5, 10 measurements
• Result display with tolerance evaluation
• UCI calibration
• Test standard ASTM A1038
• Includes 50 N probe

• Measuring ranges: HV 20 ... 999, HRC 15 ... 80
• Measuring ranges: HB 20 ... 999, HRB 20 ... 120
• Resolution: 1 (HV, HB) 0.1 (HRC, HRB)
• Accuracy: ±3 % (HV, HB), ±1.5 (HRC, HRB)
• Measuring directions: 360°
• TFT colour display
• Memory for 150 measured values
• Averaging: 3, 5, 10 measurements
• Result display with tolerance evaluation
• UCI calibration
• Test standard ASTM A1038
• Includes 50 N probe

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This borescope inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

The accelerometer has a measuring range of 0 … 200 m/s² for acceleration. In addition to acceleration, the accelerometer can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

• Acceleration
• Velocity
• Displacement
• Frequency
• Tachometer
• Infrared temperature measurement   
• 4 GB data memory
• FFT analysis and wave view of the vibration

This mobile floor scale consists of a display with connections for up to 4 weighing platforms. This floor scale requires at least two weighing platforms. Based on the wheel loads, the mobile floor scale calculates the total weight of the vehicle.

• Weighing range per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
• Readability: 5 kg / 11 lb
• Dimension per platform: 300 x 400 x 58 / 11.8 x 15.7 x 2.3"
• Calibratable

The 4-channel PCE-VM 5000 accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the accelerometer is able to record vibrations at different points of the component to be tested.

• Frequency range: 10 Hz … 1 kHz
• Measurement of acceleration, velocity and displacement
• Connection of up to 4 sensors simultaneously
• Data storage on SD card
• Including 2 additional sensors for vibration

PCE-VE 1030N is a versatile borescope inspection camera with a large 7" high-resolution display. This borescope inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Waterproof cable length: 30 m / 98 ft
• Waterproof cable diameter: 28 mm / 1.1 in
• SD card memory included

Automotive Tester PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This automotive tester  inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

PCE-VE 1030N is a versatile snake camera with a large 7" high-resolution display. This snake camera inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

The PCE-830-2 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The chimney camera PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This chimney camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

The drain camera PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This drain camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

• colour rendering index (CRI)
• colour coordinates and spectral distributions
• correlated colour temperature CCT: 1500 ... 100000 K
• illuminance range: 0.1 ... 500000 lx
• spectral resolution: ± 0.2 nm
• reproducibility: ± 0.5 nm
• accuracy of chromaticity coordinate (Δx, Δy): ±0.005
• 8 GB data memory with export function
• 5-inch touch screen
• wavelength range: 380 ... 780 nm

The PCE-830-2 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The PCE-830-2 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The two-way optics is a great advantage of the PCE-VE 1014N-F videoscope or inspection camera. There is easy control of the camera head with the PCE-VE 1034N-F videoscope. The PCE-VE 1034N-F videoscope allows you to capture images and videos, and the videos are also stored with an audio recording. 

• Cable length: 1.5 m / 4.9 ft
• Camera head: 2-way
• Diameter: 4.5 mm / 0.18 in
• Resolution: 640 x 480 Pixel
• Storage of pictures and videos
• 8 GB memory card incl.
• LED lighting

PCE-VE 1030N is a versatile industrial borescope inspection camera with a large 7" high-resolution display. This industrial borescope inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Waterproof cable length: 30 m / 98 ft
• Waterproof cable diameter: 28 mm / 1.1 in
• SD card memory included

Our Moisture Meter is a precise device for determining the moisture and solid materials and is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Moisture Meter enables precise moisture measurement.

• weighing range: 0 ... 220 g
• resolution: 0.001 g
• absolute moisture: 0 ... 100 %
• resolution: 0.01 %
• heating temperature: 40 ... 180 °C
• % moisture
• % dry matter
• % moisture bd
• g residual weight / kg
• residual weight
• data interface: RS232, USB, V24
• GLP data management with Data Bridge
• software (optional)

The PCE-830-2 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The PCE-830-2 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This Current Clamp also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

• PCE-830 + PCE-6802 amp clamp (1000 A)
• Electrical conductor pick-up: 55 mm / 2.1 in diameter
• Range selection: manual (10 A, 100 A, 1000 A)
• Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
• Sampling rate: 2 sec.
• Memory size: 512 kB (max. 52,000 values (single phase)

The easy-to-use PCE-PA 8300 Clamp Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:

• Voltage measurement range of 10 V … 600 V AC
• Current measurement range of (Set 2) 30 A … 3000 A AC
• Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
• Simultaneous display of harmonics and waveform
• Graphic Phasor diagram
• Captures transients including dip, swell, and outage