• Automatic heating function up to 40°C / 104°F
• Output: RS-485 and relay potential-free
• Operating temperature: –20 … 60°C / -4 ... 140°F

• Automatic heating function up to 40°C / 104°F
• Output: RS-485 and relay potential-free
• Operating temperature: –20 … 60°C / -4 ... 140°F

• Automatic heating function up to 40°C / 104°F
• Output: RS-485 and relay potential-free
• Operating temperature: –20 … 60°C / -4 ... 140°F

• Number of stirring positions: 1
• Stirring capacity: max. 20 l
• Stirring speed: 200 ... 1600 rpm
• Timer: 1 s ... 99 h 59 min
• Silicone stirring plate

Thanks to its small dimensions, the miniature Force Gage is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gage. With a diameter of only 10 mm, this Force Gage is smaller in diameter than a 1 cent coin.

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

A Force Gage made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the Force Gage is very versatile. 

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

This is a pressure cell as a Force Gage with a high measuring range with small dimensions. The dimensions of the Force Gage are only 9 mm in height and 19 mm in diameter. 

• Rated load / force F.S.: 5-500 kg / 50-5000N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

The miniature Force Gage can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

• Rated load / force F.S.: 10-50 kg / 100-500 N
• Limit load / force: 150 %
• Breaking load / force: 200 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gage nominal load selectable!

Thanks to its small dimensions, the miniature Force Gauge is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gauge. With a diameter of only 10 mm, this Force Gauge is smaller in diameter than a 1 cent coin.

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

A Force Gauge made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the Force Gauge is very versatile. 

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

This is a pressure cell as a Force Gauge with a high measuring range with small dimensions. The dimensions of the Force Gauge are only 9 mm in height and 19 mm in diameter. 

• Rated load / force F.S.: 5-500 kg / 50-5000N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

The miniature Force Gauge can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

• Rated load / force F.S.: 10-50 kg / 100-500 N
• Limit load / force: 150 %
• Breaking load / force: 200 %
• Rated output: 1.0 – 1.5 mV/V
• Force Gauge nominal load selectable!

Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

A force sensor made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the force sensor is very versatile. 

• Rated load / force F.S.: 5-100 kg / 50-1000 N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

This is a pressure cell as a force sensor with a high measuring range with small dimensions. The dimensions of the force sensor are only 9 mm in height and 19 mm in diameter. 

• Rated load / force F.S.: 5-500 kg / 50-5000N
• Limit load / force: 120 %
• Breaking load / force: 150 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

The miniature force sensor can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

• Rated load / force F.S.: 10-50 kg / 100-500 N
• Limit load / force: 150 %
• Breaking load / force: 200 %
• Rated output: 1.0 – 1.5 mV/V
• Force sensor nominal load selectable!

The air flow / temperature / humidity data logger determines the wind speed via an impeller with a diameter of 65 mm. The air flow / temperature / humidity data logger can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The climate meter determines the wind speed via an impeller with a diameter of 65 mm. The climate meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The data logger for temperature and humidity determines the wind speed via an impeller with a diameter of 65 mm. The data logger for temperature and humidity can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The data logger with USB interface determines the wind speed via an impeller with a diameter of 65 mm. The data logger with USB interface can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The environmental meter determines the wind speed via an impeller with a diameter of 65 mm. The environmental meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The environmental tester determines the wind speed via an impeller with a diameter of 65 mm. The environmental tester can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The HVAC meter determines the wind speed via an impeller with a diameter of 65 mm. The HVAC meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction air flow meter determines the wind speed via an impeller with a diameter of 65 mm. The air flow meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction air flow meter determines the wind speed via an impeller with a diameter of 65 mm. The air flow meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction air humidity meter determines the wind speed via an impeller with a diameter of 65 mm. The air humidity meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction air velocity meter determines the wind speed via an impeller with a diameter of 65 mm. The air velocity meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction anemometer determines the wind speed via an impeller with a diameter of 65 mm. The anemometer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction digital thermometer determines the wind speed via an impeller with a diameter of 65 mm. The digital thermometer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction humidity detector determines the wind speed via an impeller with a diameter of 65 mm. The humidity detector can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction hygrometer determines the wind speed via an impeller with a diameter of 65 mm. The hygrometer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction relative humidity meter determines the wind speed via an impeller with a diameter of 65 mm. The relative humidity meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction temperature meter determines the wind speed via an impeller with a diameter of 65 mm. The temperature meter can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction thermo hygrometer determines the wind speed via an impeller with a diameter of 65 mm. The thermo hygrometer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction thermometer determines the wind speed via an impeller with a diameter of 65 mm. The thermometer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values

The multifunction wind measurer determines the wind speed via an impeller with a diameter of 65 mm. The wind measurer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.

• Measuring range: 0.3 … 45.0 m/s / 0.9 … 147 ft/s
• Velocity and volume flow measurement
• Telescopic probe with a length of 270 … 540 mm / 10.63 … 21.26“
• Impeller opening of 65 mm / 2.5"
• Interface: Micro USB
• Data memory: 960 measured values