• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• including magnetic sensor
• incl. ISO Calibration Certificate

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• including magnetic sensor
• incl. ISO Calibration Certificate

• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

The accelerometer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this accelerometer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• including magnetic sensor
• incl. ISO Calibration Certificate

• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

The HVAC meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

• Frequency range: 10 Hz … 1 kHz
• Measures speed, distance, acceleration in metric units only
• Holds the reading after each measurement
• Easy to handle and battery operated
• Standard probe: 10 mm
• including magnetic sensor
• incl. ISO Calibration Certificate

PCE-VE 200-S is an car measuring device, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This car measuring device provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.

• 3.7 mm / 0.14 in diameter
• 1 m / 3.28 ft cable length
• 180° image rotation

PCE-MPC 10 is a portable handheld dust particle measuring device or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

With the EMF measuring device PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the EMF measuring device shows the strength of the magnetic field numerically using an X, Y and Z axis.

• Measuring ranges: 20.00 … 200.0 µT / 200.0 … 2000 mG
• Bandwidth: 50 MHz … 3.5 GHz
• Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m

• Acceleration: 0.5 ... 199.9 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.5 ... 199.9 mm/s
• Resolution: 0.1 mm/s
• Displacement: 0 ... 1.999 mm
• Resolution: 0.001 mm
• Accuracy: ±5% + 2 digits
• Frequency range: 10 Hz ... 1 kHz
• Analogue output: 4 ... 20 mA

The car measuring device is an inspection camera for non-destructive measurements. Thus the car measuring device is the ideal instrument for diagnosis in hard-to-reach places. Mechanical engineering, sanitary and heating engineering and the entire building and construction industry are among the main areas of application for the car measuring device.

• Camera head diameter: Ø 9 mm / 0.4"
• Cable length: 3 m / 9.9 ft
• Interface: Micro USB 2.0
• Storage: Micro SD card
• Front and side view cameras

PCE-MPC 10 is a portable handheld Aerosol meter / Aerosol measuring device or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

• PM channels: PM 2.5, PM 10
• Particle sizes (in micrometers): 2.5 µm, 10 µm
• Temp. measuring range: 0 … +50 °C / +32 … +122 °F
• Humidity measuring range: 0 … 100 % RH
• 2" full-color LCD with user-friendly graphics
• Integrated data logger with adjustable sampling time
• Internal memory stores up to 5000 date-and-time-stamped data sets

PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

• Measuring range of 0 … 1250 µm / 0 … 50 mils
• Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
• Features a resolution of 0.1 µ / 0.1 mils
• Incl. ISO Calibration Certificate

PCE-CT 5000H is a car measuring device used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The car measuring device automatically detects the type of metal to be measured.

• Type F measuring range: 0 … 5000 µm / 0 … 5 mm / 0 … 196 mils
• Type N measuring range: 0 … 3000 µm / 0 … 3 mm / 0 … 118 mils
• Displays measuring units in μm, mm or mils
• Saves up to 2000 measurements to internal memory
• Practical V-groove on the measuring head
• Incl. ISO Calibration Certificate

This closing force transducer is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force transducer that can be installed in a force measurement stand.

• Measuring range: 0.5 … 50 N / 0.1 … 11 lbs
• Resolution: 0.01 N / 0.002 lbs
• Evaluation via USB interface
• Different shaped measuring adapters
• Device for mounting on test stands
• incl. ISO Calibration Certificate