• Measuring range: 0 … 100 kN / 100,000 N
• Resolution: 10 N
• Accuracy: ± 1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

• Measuring range: 0 … 100 kN / 100,000 N
• Resolution: 10 N
• Accuracy: ± 1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The Ozone Meter Xgard-1-O3 is a single-gas gas sensor used to warn for gases (Ozone, O₃, 0 … 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

• Stationary
• For (Ozone, O₃, 0 … 1 ppm)
• Additional display and alarm station
• ATEX or UL approval

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

• Moisture measurement range: 0 ... 100%
• Weighing range: 20 ... 300 g
• Weighing resolution: 0.001 g
• 5.5-inch colour touchscreen
• Halogen heating with adjustable drying temperature
• Automatic or timed end of analysis
• Continuous moisture display and graphical drying curve
• Storage and recall of measurement results
• incl. ISO calibration certificate

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts, etc.

• Moisture measurement range: 0 ... 100%
• Weighing range: 20 ... 300 g
• Weighing resolution: 0.001 g
• 5.5-inch colour touchscreen
• Halogen heating with adjustable drying temperature
• Automatic or timed end of analysis
• Continuous moisture display and graphical drying curve
• Storage and recall of measurement results
• incl. ISO calibration certificate

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

The PCE-DDM 3 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 3 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Units of measurement: kg / t / lbs / N / kN
• Comes with remote control indicator

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts, etc.

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN40 (35 ... 43 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN40 (46 ... 54 mm)

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

PCE-ATP 1 is a food safety / hygiene - ATP test instrument, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Minimum load: 10 kg
• Supplied with remote control indicator

• measurement range: 0 ... 10 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

The PCE-DDM 3 Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator

• measurement range: 0 ... 10 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

The PCE-DDM 3 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

• Measurement range: 3,000 kg / 30 kN / 6,614 lbs
• Resolution: 1 kg / 10 N
• Units of measurement: kg / t / lbs / N / kN
• Supplied with remote control indicator

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN40 (35 ... 43 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN40 (46 ... 54 mm)

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Rechargeable battery
• Color graphic display

PCE-ATP 1 is a Hygiene Tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts etc.

• Camera head diameter: 28 mm / 1.1"
• Camera cable length: 10 m / 32 ft 9"
• Interface: Mini-USB 1.1 and AV out
• Memory: 8 GB SD memory card (incl.)
• Especially suitable for chimneys, downpipes, ventilation ducts, etc.

PCE-ATP 1 is a IoT sensor, ATP meter, lumitester or luminometer used for surface testing. This IoT sensor allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an IoT sensor that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue