Products for 'indicador panel pce instruments m dulo modbus rtu para pce dpd u'

AED 132,274.00

Price excl. VAT &. delivery

The NDT Test Instruments enables precise visual inspections and 3D measurements in industrial applications. The NDT Test Instruments offers high-resolution image and video recording as well as versatile measurement functions for demanding inspection tasks.

Depth of field (DOF): 10 ... 100 mm
Resolution: 1280 × 720 pixels
3D measurement function
Accuracy: up to 0.01 mm
8x digital zoom
Image and video recording
PDF test report
7" IPS touch display
5 brightness levels
HDMI, USB-A, USB-C
Memory: 16 GB internal, SD card up to 128 GB
Front and side view
Picture-in-picture mode
Dual camera preview
Wi-Fi

Accelerometer PCE-PVS 10-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

The Accelerometer, was developed for continuous monitoring of vibration velocity. The Accelerometer is available in various versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

Measuring range: ± 12.7 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Accelerometer PCE-PVS 20-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

Measuring range: ± 25.4 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

NDT Test Instruments PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The industrial borescope has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Vibration Analyzer / Vibration Analyser PCE-PVS 10-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

The Vibration Analyzer / Vibration Analyser, was developed for continuous monitoring of vibration velocity. The Vibration Analyzer / Vibration Analyser is available in various versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

Measuring range: ± 12.7 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Vibration Analyzer / Vibration Analyser PCE-PVS 20-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

Measuring range: ± 25.4 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Vibration Meter / Vibration Tester PCE-PVS 10-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

The Vibration Meter / Vibration Tester, was developed for continuous monitoring of vibration velocity. The Vibration Meter / Vibration Tester is available in various versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

Measuring range: ± 12.7 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Vibration Meter / Vibration Tester PCE-PVS 20-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

Measuring range: ± 25.4 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Vibration Transducer PCE-PVS 10-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

The Vibration Transducer was developed for continuous monitoring of vibration velocity. The Vibration Transducer is available in various versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

Measuring range: ± 12.7 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

Vibration Transducer PCE-PVS 20-DPD-U

AED 3,344.00

Price excl. VAT &. delivery

The Vibration Transducer, was developed for continuous monitoring of vibration velocity. The Vibration Transducer is available in various versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range.

Measuring range: ± 25.4 mm/s
Frequency range: 3 … 1500 Hz
Design: vertical connection
Power supply: 12 … 24 V DC in current loop
including built-in display PCE-DPD-U

NDT Test Instruments PCE-VE 800N4 1.5 m / 4-way-head / Ø 2.8 mm

AED 39,913.00

Price excl. VAT &. delivery

The industrial borescope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

Cable / head diameter: 2.8 mm
Direction of movement camera head: 4-way
Camera head length: 8 mm
Bending radius: 7 mm
1.5 m / 4.9 ft endoscope cable- 4-way camera
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Panel Indicator PCE-DPD-U

AED 828.00

Price excl. VAT &. delivery

The installation display can be configured as AC and DC voltmeters (up to 600 Vac / DC), AC and DC ammeters (up to 5 AAC / DC). Furthermore, the built-in display shows measured values of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC and NTC), resistors, potentiometers and frequency.

Input:
2-, 3- wire
Thermocouples
Potentiometer
Resistance
Process signals
Frequency
DC voltage
DC power
AC voltage
AC power

Panel Meter PCE-BPD-U-41A

AED 5,300.00

Price excl. VAT &. delivery

The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meter is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Panel Meter PCE-BPD-U-41D

AED 5,300.00

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

Panel Meter PCE-DPD-U

AED 828.00

Price excl. VAT &. delivery

The panel meter can be configured as AC and DC voltmeters (up to 600 Vac / DC), AC and DC ammeters (up to 5 AAC / DC). Furthermore, the built-in display shows measured values of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC and NTC), resistors, potentiometers and frequency.

Input:
2-, 3- wire
Thermocouples
Potentiometer
Resistance
Process signals
Frequency
DC voltage
DC power
AC voltage
AC power

Panel Meter PCE-BPD-U-46A

AED 3,482.00

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 60 mm / 2.3"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Panel Meter PCE-BPD-U-46D

AED 3,482.00

Price excl. VAT &. delivery

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 60 mm / 2.3"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

NDT Test Instruments PCE-VE 400N4 1.5 m / 4-way-head / Ø 4 mm

AED 21,854.00

Price excl. VAT &. delivery

The industrial borescope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 4 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

Cable / head diameter: 4 mm
Direction of movement camera head: 4-way
Camera head length: 18 mm
Bending radius: 8 mm
1.5 m / 4.9 ft endoscope cable
5" monitor
Image and video memory
IP67 camera cable
1,000,000 pixel image resolution

Panel Meter PCE-DPD-F2

AED 1,568.00

Price excl. VAT &. delivery

The built-in display is used to indicate the Panel Meter, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the Panel Meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The Panel Meter shows the measured values on a 6-digit LED display.

Power supply: 11 … 60 V DC / 24/48 V AC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height: 14 mm

NDT Test Instruments PCE-5000

AED 27,178.00

Price excl. VAT &. delivery

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Panel Meter PCE-DPD-F2

AED 1,568.00

Price excl. VAT &. delivery

The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 11 … 60V DC / 24/48V AC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Panel Meter PCE-DPD-F1

AED 1,513.00

Price excl. VAT &. delivery

The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 85 … 265V AC / DC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

NDT Test Instruments PCE-COM 20

AED 29,561.00

Price excl. VAT &. delivery

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

Operating frequency: 60 kHz
Sine wave probe: Ø 14 mm / ≈ 0.55 in
Memory: Up to 500 groups of measurements
Lift-off and temperature compensation
Automatic calibration

NDT Test Instruments PCE-VE 260HT

AED 23,603.00

Price excl. VAT &. delivery

The NDT test instruments offers an advanced solution for visual inspection in extreme environments with temperatures of up to 300 °C. With a specially developed high-temperature camera cable, it enables reliable image and video recording even under extreme conditions. The integrated connection on the camera cable for air cooling ensures effective cooling during use.

High-temperature camera cable up to 300 °C
Length of camera probe: 2 m
Diameter of camera probe: 6 mm
Connection for air cooling
4-way camera head
Illumination via LED fibre optics
HDMI image transmission
32 GB micro SD card memory

Panel Indicator PCE-DPD-P2

AED 1,228.00

Price excl. VAT &. delivery

The Panel Indicator has two pulse inputs (NPN/PNP) and a reset input. The 6-digit LED display from the Panel Indicator shows measured values between -199,999 and 999,999.

Supply voltage: 11 … 60V AC / DC
2 counting inputs
1 reset input
6-digit LED display

Condition Monitoring Inspection Camera PCE-VE 800N4 1.5 m / 4-way-head / Ø 2.8 m

AED 39,913.00

Price excl. VAT &. delivery

The condition monitoring inspection camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this condition monitoring inspection camera. The camera head of this condition monitoring inspection camera can move freely in 4 directions.

Cable / head diameter: 2.8 mm
Direction of movement camera head: 4-way
Camera head length: 8 mm
Bending radius: 7 mm
1.5 m / 4.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Panel Indicator PCE-DPD-P1

AED 1,122.00

Price excl. VAT &. delivery

The Panel Indicator has two pulse inputs (NPN/PNP) and a reset input. The 6-digit LED display of the Panel Indicator shows measured values between -199,999 and 999,999.

Supply voltage: 85 … 265V AC / DC
2 counting inputs
1 reset input
6-digit LED display

NDT Test Instruments PCE-VE 270HRS

AED 22,913.00

Price excl. VAT &. delivery

The industrial borescope gives you new, visual insights into the interior of motors and systems. The industrial borescope is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an industrial borescope has never been so easy.

Cable length: 1000 mm, 3.28 ft
Cable diameter: 2.1 mm, 0.08"
0° viewing angle
Camera resolution / image sensor: 400 x 400 Px
Cable type: flexible
Video output: HDMI
LED light

NDT Test Instruments PCE-UCD 100

AED 24,155.00

Price excl. VAT &. delivery

The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
Includes a camera for measuring crack width
Bandwidth: 1 to 500 kHz
Display: 10.1" TFT touchscreen display
Internal storage: 8 GB

Car Measuring Device PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The car measuring device has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this car measuring device. The camera head of this car measuring device can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Snake Camera PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The snake camera has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this snake camera. The camera head of this snake camera can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Videoscope PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The videoscope has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this videoscope. The camera head of this videoscope can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Inspection Camera PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The inspection camera has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this inspection camera. The camera head of this inspection camera can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Industrial Borescope PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Automotive Tester PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The automotive tester has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this automotive tester. The camera head of this automotive tester can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution

Surface Testing - Inspection Camera PCE-VE 900N4 1.1 m / 4-way-head / Ø 2 mm

AED 54,061.00

Price excl. VAT &. delivery

The surface testing - inspection camera has a 1.1 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this surface testing - inspection camera. The camera head of this inspection camera can move freely in 4 directions.

Cable / head diameter: 2 mm
Direction of movement camera head: 4-way
Camera head length: 7 mm
Bending radius: 6 mm
1.1 m / 3.9 ft endoscope cable
5" monitor
Image and video memory
IP58 camera cable
400 x 400 pixel image resolution