• Measuring geometry: 8° / d
• Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
• USB cable and software for data transfer
• 2,000 reference standard memory, 20,000 sample memory
• Light source: D65, A, C, D50
• Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
• incl. ISO-Calibration Certificate

The IoT sensor roughness tester is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

• Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
• Measurement accuracy: <± 10%
• Micro USB interface
• Bluetooth
• 3 different cut-off wavelengths
• Download free app from the Google Play Store

• Pressure range: -0.088 ... +1.6 MPa
• High accuracy: 0.05 % FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05 % FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The Bluetooth IoT sensor - roughness tester is used to determine surface roughness. The compact IoT sensor is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The IoT sensor is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• Bluetooth
• Download the app for free from the Google Play Store
• incl. ISO Calibration Certificate

PCE-ATP 1 is a IoT sensor, ATP meter, lumitester or luminometer used for surface testing. This IoT sensor allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an IoT sensor that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

The PCE-ITE 50 is a robust IoT sensor with a large 3.5" TFT color LCD display. The IoT sensor also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

• 3.5" color TFT LCD display
• Loop resistance L-N, L-PE and N-PE
• Adjustable FI test current
• SD card and Bluetooth
• Dual display
• Good / bad FI test
• Low Ohm measurement
• Up to 1000V terminal voltage

The sound sensor is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The sound sensor is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

• Measuring range: 30 … 130 dB in 3 ranges
• Resolution: 0.1 dB
• Accuracy: ±1.5 dB
• Class 2 and frequency weighting: A
• Output: 4 … 20-mA and alarm relay output of 5 A / up to 240V AC
• IP 54 ingress protection rating on transmitter
• Includes digital indicator with IP 65 rating

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

The pressure / fill level sensor is based on a ceramic measuring cell. This level sensor was developed for the measurement of levels in waste water, polluted and highly viscous media. As a special feature of this level sensor, the probe and cable part can be separated from one another.

• Nominal pressures up to 100 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for sewage, fuels and water
• Ceramic sensor
• Different configurations possible

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

The pressure sensor is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure sensor is versatile.

• Measuring range: 0 … 2900 psi, 0 … 200 bar
• Resolution: 1.45 psi, 0.1 bar
• Scaled bar graph
• Measurable media: gases, water
• incl. ISO Calibration Certificate

PCE-VS11 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

• Frequency range (max.): 0.1 Hz …10 kHz
• Measuring range: Acceleration = 0.1 … 1000 m/s², Speed = Frequency-dependent
• Connections: Screw terminals for power supply (5 … 30V DC) and Micro USB (internal)
• Mounting: M8 stud bolt

• Acceleration: 0.1 ... 300 m/s²
• Resolution: 0.1 m/s²
• Velocity: 0.1 ... 300 mm/s
• Resolution: 0.01 mm/s
• Displacement: 0.001 mm
• Resolution: 0.001 mm
• Accuracy: ±(10 % of full scale +0.2)
• Switchable units (metric/imperial)

The sound sensor is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. The sound sensor is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.

• Measuring range: 30 … 130 dB in 3 ranges
• Resolution: 0.1 dB
• Accuracy: ± 1.5 dB
• IP 54 ingress protection rating on transmitter

The stainless steel immersion pressure / fill level sensor is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media.

• Nominal pressures up to 200 mH2O
• Accuracy ± 0.35% of the measuring range
• 39.5 mm diameter
• Suitable for drinking water production
• Ceramic sensor
• Suitable for dirty and viscous media
• Different configurations possible

• Measurement range: 0 … 500°C / 32 … 932 °F
• Accuracy: ± 1.5°C or ± 1%
• Optical resolution: 15:1
• Output signal: 4 … 20-mA standard signal
• For fixed installation (mounting bracket incl.)