Products for 'Afstandsmeter GLM 250 VF '

AED 437.98

Price excl. VAT &. delivery

The digital panel indicator is is used to show DC voltage parameters. The panel indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this panel indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Panel Indicator PCE-N30U

AED 845.76

Price excl. VAT &. delivery

The panel indicator can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the panel indicator.

21-point scaling
IP 65 protection on the front
Three-colored display
Two alarm outputs

Panel Indicator PCE-DPD-Px Series

AED 740.04

Price excl. VAT &. delivery

This multifunction digital panel indicator is a pulse counter, tachometer and and periodometer, for all types of pulse signals, and for all types of applications in the industry. The digital panel indicator has pulse type input signals, and the most common types in the industry are NPN, PNP, Namur, push-pull, inductive, potential-free, quadrature, …

Digital panel indicator with function of pulse counter, tachometer and periodimeter
LED display 6 digits red 14 mm
Signal ranges: counter up to 250 KHz, tachometer up to 500 KHz, periodimeter up to 500 KHz
Functions: Push-pull inputs, NPN, PNP, Namur, pick-up, TTL, inductive, mechanical contact, quadrature signals (encoder)

Panel Indicator PCE-N24Z AC Voltage / Current

AED 427.92

Price excl. VAT &. delivery

The panel indicator is used to display AC parameters. The panel indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Panel Indicator PCE-N20Z AC Voltage / Current

AED 583.98

Price excl. VAT &. delivery

The panel indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the panel indicator.

Input: 1A AC, 5A AC, 100V AC, 250V AC, 400 V AC, 20 … 500 Hz (selectable)
Supply voltage: 85 … 253V AC/DC / 20 … 40 V AC/DC (selectable)
Display: 5 digits, three colors
Digit height: 14 mm / 0.55"

Panel Indicator PCE-N20T

AED 558.81

Price excl. VAT &. delivery

The digital panel indicator is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the panel indicator. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

Input: Pt100, thermocouple type J or type K
Accuracy: ± (0.2 % FS + 1 dgt.)
two open collector outputs
24 V power supply sytem for sensors and transducers
5-digit, three-coloured LED display

Panel Indicator PCE-N20I

AED 488.33

Price excl. VAT &. delivery

The panel indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel indicator.

Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
Accuracy: ± (0.2 % FS + 1 dgt.)
Two open collector outputs
24 V power supply sytem for sensors and transducers

Panel Indicator PCE-N20U

AED 488.33

Price excl. VAT &. delivery

The PCE-N20U is a panel indicator used for signal processing. Designed for quick and easy system integration, the digital panel indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel indicator also can output signals via two open collector outputs when a threshold value is exceeded.

Input (selectable): 0…10 V / 0…60 mV / ±10 V
Accuracy: ± (0.2 % FS + 1 digit)
24 V power supply system for sensors and transducers