Products for 'Afstandsmeter GLM 250 VF '

AED 5,061.00

Price excl. VAT &. delivery

The panel meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This panel meter consists of an LED display (100 mm high) and is protected according to IP 54.

Temperature measuring range: 0 … +60 °C (Celsius only)
Humidity measuring range: 10 … 95 % RH
Up to 50 m (164 ft) reading distance
External sensor (wired)

Panel Meter PCE-N24H

AED 437.98

Price excl. VAT &. delivery

The digital panel meter is is used to show DC voltage parameters. The panel meter can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this panel meter.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Panel Meter PCE-N30P

AED 911.21

Price excl. VAT &. delivery

The panel meter can determine the most important system parameters of a single-phase network. Based on the current and voltage, the panel meter calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The panel meter can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.

Input: 0.02…6 A / 0…480 V / 45.00…100.00 Hz
Accuracy: 0.2 %
IP65 protected front
two alarm outputs

Panel Meter PCE-N27P

AED 896.11

Price excl. VAT &. delivery

The panel meter measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The panel meter measures all relevant network parameters such as current, voltage, power and frequency. The panel meter is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

Panel Meter PCE-N30U

AED 845.76

Price excl. VAT &. delivery

The panel meter can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel meter applicable in a wide range of applications. The measured values are shown on the large LED display of the panel meter.

21-point scaling
IP 65 protection on the front
Three-colored display
Two alarm outputs

Panel Meter PCE-N24Z

AED 427.92

Price excl. VAT &. delivery

The panel meter is used to display AC parameters. The panel meter can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel meter.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Panel Meter PCE-N20Z

AED 583.98

Price excl. VAT &. delivery

The panel meter can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the panel meter.

Input: 1A AC, 5A AC, 100V AC, 250V AC, 400 V AC, 20 … 500 Hz (selectable)
Supply voltage: 85 … 253V AC/DC / 20 … 40 V AC/DC (selectable)
Display: 5 digits, three colors
Digit height: 14 mm / 0.55"

Panel Meter PCE-PA39

AED 493.36

Price excl. VAT &. delivery

The panel meter is designed to monitor AC power. This analogue indicator can be installed onto switch panels. The panel meter is a moving-coil ammeter. Active power as well as apparent power can be measured by means of this panel meter.

Moving-coil meter to measure electric power
96 x 96 mm
Panel installation

Panel Meter PCE-N30O-3

AED 669.56

Price excl. VAT &. delivery

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

2 internal counters
Front IP 65
3 colour indication display
2 alarm outputs

Panel Meter PCE-N20T

AED 558.81

Price excl. VAT &. delivery

The digital panel meter is used for processing signals from Pt100 temperature sensors or thermocouples (type J, K). The measurement results are shown on the large 5-digit LED-display of the panel meter. Depending on the actual values, the temperature can be shown in three different colors, which makes it easier to evaluate them.

Input: Pt100, thermocouple type J or type K
Accuracy: ± (0.2 % FS + 1 dgt.)
two open collector outputs
24 V power supply sytem for sensors and transducers
5-digit, three-coloured LED display

Panel Meter PCE-N20I

AED 488.33

Price excl. VAT &. delivery

The panel meter is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the panel meter suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the panel meter.

Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
Accuracy: ± (0.2 % FS + 1 dgt.)
Two open collector outputs
24 V power supply sytem for sensors and transducers

Panel Meter PCE-N20U

AED 488.33

Price excl. VAT &. delivery

The PCE-N20U is a panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The panel meter also can output signals via two open collector outputs when a threshold value is exceeded.

Input (selectable): 0…10 V / 0…60 mV / ±10 V
Accuracy: ± (0.2 % FS + 1 digit)
24 V power supply system for sensors and transducers