PCE-5000 is a Ultrasonic testing device that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

The PCE-TG 300-NO2 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth

The PCE-TG 300-HT5 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 12mm / 0.47"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 5MHz
• Bluetooth

The PCE-TG 300-NO2 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth

The PCE-TG 300-NO7 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN80 (72 ... 80 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN80 (83 ... 91 mm)