The calibrator / simulator is used to calibrate temperature sensors such as Pt100, Pt1000 and many other temperature sensors. The dry block function offers a practical solution for calibrating temperature sensors in the laboratory and in the field.
The simulator for light measuring devices is characterised by its precise properties. The light intensity of the simulator is fixed at 100 lux and ensures reliable and precise adjustment of the light sensors.
The PCE-AT 5 car measuring device - handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.
The Car Measuring Device PCE-CBA 10 can be used as a car battery tester. To test the battery, the car measuring device can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.
The Car Measuring Device tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling.
The car measuring device is used for quick and easy AC measurements. For current measurement, the car measuring device is plugged over the live conductor. The car measuring device is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.
Digital Multimeters up to 200 A
Compact dimensions
Robust plastic housing
Multimeter functions
Safety conditions: IEC1010-1 (2001) CAT II 1000V CAT III 600V
The car measuring device is used for quick and easy AC measurements. For current measurement, the car measuring device is plugged over the live conductor. The car measuring device is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.
Digital Multimeters up to 200 A
Compact dimensions
Robust plastic housing
Multimeter functions
Safety conditions: IEC1010-1 (2001) CAT II 1000V CAT III 600V
The car measuring device is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the car measuring device without contact. This current range of the car measuring device covers a large range of current measurements.
The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.
The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.
With this car measuring device, layer thicknesses on metallic surfaces can be reliably determined. The car measuring device has a measuring range of 1500 µm. This means that the car measuring device is used, for example, in a paint shop, for incoming goods inspection or for an expert.
With this car measuring device, layer thicknesses on metallic surfaces can be reliably determined. The car measuring device has a measuring range of 1500 µm. This means that the car measuring device is used, for example, in a paint shop, for incoming goods inspection or for an expert.
The car measuring device is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this car measuring device does not have to differentiate between ferrous and non-ferrous metal.
Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm
The car measuring device is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this car measuring device does not have to differentiate between ferrous and non-ferrous metal.
Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm
The car measuring device can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The car measuring device is ideally suited to immediately detect, for example, accident damage to the vehicle.
The car measuring device can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The car measuring device is ideally suited to immediately detect, for example, accident damage to the vehicle.
PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.
PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
