Order no.: PCE-TG 150A

Thickness Gauge PCE-TG 150A

Question / Callback

Delivery time: 1-2 working days

Description

Thickness Gauge with data memory / Adjustable speed of sound /
Calibration reference mounted on the housing / Material thickness measurement up to 300 mm /
Limit alarm / Optional ISO calibration certificate

The thickness gauge can measure material thicknesses up to 300 mm / 11.81". So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding speed of sound in the thickness gauge. For materials such as steel, aluminum, zinc, silver and gold, the appropriate sound speeds are already stored in the device library. This means that the thickness gauge can be used universally.

With the limit value function in the thickness gauge, individual maximum and minimum values can be stored. If the measured value of the test piece is outside the limits, the thickness gauge signals this visually. If necessary, the signaling can also be done acoustically by the thickness gauge in addition to the visual display. This is why the thickness gauge is used, for example, in quality assurance and in incoming goods inspections.

The thickness gauge has a data memory on which the measured values can be recorded. After a measurement sequence, the stored measurement values can be analyzed directly on the thickness gauge. The stored data are graphically displayed by the thickness gauge. In addition, each individual measuring point can be approached and read in the graphics of the thickness gauge. For a simplified analysis of the measured values, the average, the largest and smallest measured value is displayed on the thickness gauge. The thickness gauge can optionally be equipped with an ISO calibration certificate.

thickness gauge with data memory / adjustable sonic velocity / calibration reference mounted on the housing / material thickness measurement up to 300 mm / limit value alarm / optionally with ISO calibration certificate

The thickness gauge can measure material thicknesses up to 300 mm. To ensure that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sonic velocity in the thickness gauge. For materials such as steel, aluminium, zinc, silver and gold, the appropriate sonic velocities are already stored in the device library. This means that the thickness gauge can be used universally.

Individual maximum and minimum values can be stored with the thickness gauge's limit value function. If the measured value of the test specimen is outside the limits, the thickness gauge signals this visually. If required, the thickness gauge can also provide acoustic signalling in addition to the visual display. The thickness gauge is therefore used, for example, in quality assurance and incoming goods inspection.

The thickness gauge has a data memory on which the measured values can be recorded. After a measurement process, the stored measured values can be analysed directly on the thickness gauge. The stored data is displayed graphically by the thickness gauge. In addition, each individual measuring point can be approached and read in the graphic of the thickness gauge. To simplify the analysis of the measured values, the average, the largest and smallest measured values are displayed on the thickness gauge. The thickness gauge can optionally be equipped with an ISO calibration certificate.

Highlights

- Measured value memory
- Calibration reference on the housing
- Automatic shutdown
- Material thickness measurement up to 300 mm / 11.81"
- Battery status indicator
- Optionally with ISO calibration certificate

- Measured value memory for 1500 values

- Calibration reference on housing

- Automatic switch-off

- Material thickness measurement up to 300 mm

- Battery status display

- Optional with ISO calibration certificate

Specification

Measuring range	1.00 ... 300.0 mm / 0.04 ... 11.81"
Resolution	0.01 mm at ≤99.99 mm
	0.1 mm at ≥100.0 mm
Accuracy	±0.5 % of measured value + 0.05 mm

Storage space	1500 measured values
Probe frequency	5 MHz / 2.5 MHz
Standard sensor	sensor PCE-TG 5M10d

Further specifications
Adjustable speed of sound	1000 ... 9999 m/s
Smallest pipe diameter	Ø20 x 3 mm (steel)
Material library	15 memory locations
Calibration reference	4 mm
Display	2.4 inch TFT LCD color display
	with brightness adjustment
Power supply	3 x 1.5 V AA batteries
Automatic switch-off	switched off, 2, 5, 10, 30 minutes
Ambient conditions	0 ... 40 °C / 32 ... 104 °F, <90 % RH, non-condensing
Dimensions	163 x 82 x 38 mm / 6.4 x 3.2 x 1.5"
Weight	320 g / 11.2 oz

Material thickness
Measuring range	1 mm ... 99.99 mm
Resolution	0.01 mm
Accuracy	±0.5 % v. Mw. + 0.05 mm

Material thickness
Measuring range	100 mm ... 300 mm
Resolution	0.1 mm
Accuracy	±0.5 % v. Mw. + 0.05 mm

Sensor
Designation	PCE-TG 5M10d
Frequency	5 MHz
Temperature range	-10 ... 60 °C
Measurable materials	Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials
Minimum diameter of pipes	30 mm
Additional description	Standard probe for flat materials
Dimensions	Ø 10mm x 23.4 mm
Weight	39.5 g

Sensor
Designation	PCE-TG 5M6d
Measuring range	1 mm ... 50 mm
Frequency	5 MHz
Temperature range	-10 ... 60 °C
Measurable materials	Steel, aluminium, zinc, silver, gold, metal, plastic, ceramic, glass, other homogeneous materials
Minimum diameter of pipes	20 mm
Additional description	Standard probe for flat materials
Dimensions	Ø 6mm x 25.3 mm
Weight	35 g

General technical data
Units	mm
Display type	TFT colour display
Display size	2.4 inch
Storage medium	Internal memory
Memory capacity	1500 values
Automatic switch-off from...to	2 ... 30 min.
Automatic switch-off can be deactivated	Yes
Sonic speed adjustable	1000 ... 9999 m/s
Menu language	English (US), Chinese
Protection class (device)	IP52
Weight	230 g
Dimensions (L x W x H)	168 x 87 x 35 mm
Operating conditions	0 ... 40 °C , 0 ... 90 % r.H
Storage conditions	0 ... 40 °C , 0 ... 90 % r.H
Accumulator/battery	3x 1.5 V AA battery , alkaline-manganese
Capacity	3000 mAh

Delivery Scope

1 x Thickness Gauge PCE-TG 150
1 x Sensor PCE-TG 5M10d
1 x Coupling gel (TT-GEL)
1 x Transport bag
3 x 1.5 V AA batteries
1 x Quick start guide

1 x thickness gauge PCE-TG 150A

1 x coupling gel (TT-GEL)

3 x 1.5 V AA batteries

1 x sensor PCE-TG 5M10d

1 x sensor PCE-TG 5M6d

1 x carrying bag

1 x quickstart guide

Accessories

Thickness Meter

Mhz sensor PCE-TG 2.5M

£ 201.00

Price excl. VAT &. delivery
2 year Warranty

2.5 Mhz sensor

- Measuring range: 1.2 … 300 mm / 0.04 … 11.81"
- Probe frequency: 2.5 MHz
- Diameter: 12 mm
- Temperature range: -10 ... 60 °C / 14 ... 140 °F

Thickness Meter

High temperature sensor PCE-TG HT

£ 436.00

Price excl. VAT &. delivery
2 year Warranty

High temperature sensor

- Temperature range: -10 ... 350 °C / 14 ... 662 °F
- Measuring range: 1.2 … 300 mm / 0.04 … 11.81"
- Probe frequency: 5 MHz
- Diameter: 12 mm

Thickness Meter

Miniature sensor PCE-TG 5M6d

£ 149.00

Price excl. VAT &. delivery
2 year Warranty

Miniature sensor

- Measuring range: 1 … 50 mm / 0.04 … 1.96"
- Probe frequency: 5 MHz
- Diameter: Ø6 mm
- Temperature range: -10 ... 60 °C / 14 ... 140 °F

Thickness Meter

Standard sensor PCE-TG 5M10d

£ 119.00

Price excl. VAT &. delivery
2 year Warranty

Standard probe for the PCE-TG 75/150

- Measuring range: 1 … 225 mm / 0.04 … 8.85" / for the PCE-TG 75
1 … 300 mm / 0.04 … 11.81" / for the PCE-TG 150
- Probe frequency: 5 MHz
- Diameter: Ø10 mm
- Temperature range: -10 ... 60 °C / 14 ... 140 °F

Thickness Meter

ISO Calibration Certificate for Material Thickness Meter

£ 157.00

Price excl. VAT &. delivery
2 year Warranty

The calibration certificate shows the accuracy the device has achieved under defined test conditions. The material thickness measuring device is tested in our calibration laboratory for the following reference values:

Measurement accuracy:

five parallel gauge blocks with the thicknesses
5 mm; 10 mm; 20 mm; 50 mm and 100 mm

N.B. The calibration certificate is issued by the PCE calibration service specifically for the customer and is excluded from the right of return.

Re-Calibration for Material Thickness Meter

£ 157.00

Price excl. VAT &. delivery
2 year Warranty

ISO re-calibration incl. certificate for material thickness meter. This is often required to comply with DIN ISO 9000.

- Calibration points are: 5; 10; 20; 50 and 100 mm

If your calibration certificate expires, you can easily return your meter for re-calibration. We carry out the calibration and send you the device with a new calibration certificate.

Calibration certificates are issued specifically for the customer and are excluded from the right of return

Thickness Gauge

K-Gel High Temperature Coupling Gel

£ 88.00

Price excl. VAT &. delivery
2 year Warranty

The contact gel is used in ultrasonic material thickness measurements. The gel ensures good contact between the measuring head and the workpiece. The high temperature contact gel can be used at temperatures up to 350°C / 662°F.

- Usable up to 350°C / 662°F
- Content: 100 ml