Cable Fault Meter

A cable fault meter can locate open power cables, either live or dead (without current), with voltages up to 300 V. A cable fault meter can locate cables, circuits, short circuits and ground wires. To perform these functions, it is not always necessary to disconnect electrically sensitive devices or to disconnect the power from the cable which is being tested. Many cable fault meter devices can also locate ferrous and non-ferrous metals, wood and plastic with high degrees of accuracy.

A cable fault meter provides a safe way to test wall sockets when you are not sure about the cables within and their output. A cable fault meter is also very useful, as it allows for quick and safe checks before drilling holes in walls, ceilings and floors, so that workers do not accidentally electrocute themselves.

Catalog

Cable fault meter catalog

If you have any questions, please contact us at or +44 ( 0 ) 161 464902 0.

Cable Fault Meter PCE-160 CB

£ 8.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-160 CT cable fault meter is a line locator for hard-to-reach cables and is used, for example, in the automotive sector. In addition to the line location, there is also the continuity test with the cable fault meter.

- Sensitivity adjustment
- Headphone jack
- Different beeps
- Cable tracking in walls and cable channels
- For mobile use

Cable Fault Meter PCE-LT 12

£ 53.00

Price excl. VAT &. delivery
2 year Warranty

The cable fault meter is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable fault meter also has a network analysis. With this network analysis, the cable fault meter can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Cable Fault Meter PCE-191 CB

£ 89.00

Price excl. VAT &. delivery
2 year Warranty

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.

- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm

Cable Fault Meter PCE-180 CBN

£ 114.00

Price excl. VAT &. delivery
2 year Warranty

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.

- Uses an acoustic signal to detect wires and cables, including
network and coaxial cables
- Features a 3-position toggle switch (and 3-color LED) for line
polarity, continuity and voltage testing
- Comes with red and black test leads with alligator clips

Cable Fault Meter PCE-CLT 20

£ 164.00

Price excl. VAT &. delivery
2 year Warranty

The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω.

- Cable Length: 0.1 m ... 30 km

- Standard Cable Types: Selectable from 0.15 ... 240 mm²

- Units in meters, kilometers, and feet

- 8 memory slots for custom cable types

- Copper and aluminum cables
- Resistance: 0.1 mΩ ... 1999.9 Ω

Cable Fault Meter PCE-CLT 10

£ 222.00

Price excl. VAT &. delivery
2 year Warranty

The cable fault meter PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the cable fault meter can be used to measure cables that have already been installed and are still to be installed.

- Measuring range cable length: 5 ... 3000 m / 16.4 ... 9842.5 ft
- Measurement Units: m, ft
- Resolution: 0.1 m / 0.3 ft
- Measuring principle: time domain reflectometer
- 20 pre-set cable types

Cable Fault Meter PCE-CL 20

£ 262.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable fault meter also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.

- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes