2 year Warranty
The mechanical 3D microscope PCE-IVM 3D can be used for reflected light and transmitted light microscopy and therefore allows the creation of three-dimensional representations of the objects. This 3D mechanical microscope that allows object to be checked all around thanks to a mechanical mirror (360°).
- Magnification continuously from 12 ... 75 times
- Height adjustable for larger objects
- Incident and transmitted illumination
- Data transfer via USB 2.0
- 360° rotatable mirror
The PCE-VM 21 consists of an optical microscope, CCD camera and LCD screen. Due to the 75-fold magnification, it is possible to view very small parts, electronics and even medical instruments very clearly. The PCE-VM 21 inspection microscope reduces eye strain during soldering of printed circuit boards (PCBs), investigating of material defects on metal surfaces, and inspecting surgical implements for reprocessing, making the PCE-VM 21 industrial, healthcare or food / hygiene microscope a vital addition to your plant, shop, production line, quality assurance laboratory or instrument reprocessing clean room. The PCE-VM 21 quality assurance microscope offers:
- Continuous magnification from 10 ... 75 times
- Adjustable height for viewing of larger objects
- Transmitted light and incident light illumination
Thanks to the integrated 7.62 cm / 3" TFT color display and Li-Ion batteries, the microscope can be PC-independent and therefore used completely mobile. Equipped with 8 white LEDs increases the microscope up to a 500-fold size and thus captures even the smallest details in image or video.
- A retractable 7.62 cm / 3" TFT color display
- CMOS Image Sensor 5.0 Mega Pixel
- Image resolution: 12 million (interpolated), 9 million (interpolated), 5 million, 3
million, 1.3 million, VGA
PCE-MM 200UV is a UV USB microscope, or UV USB inspection camera, that magnifies objects up to 200 times. This UV microscope uses 8 UV LEDs with a wavelength of 400 nm for illumination. The microscope captures photos and videos as well as displays magnified objects in real time on your computer screen.
- Magnification: Continuous, 10 ... 200 times (infinitely variable)
- Resolution: 1600 x 1200 pixels
- Colors: 24-bit RGB
The PCE-MM 800 microscope is designed to display simple magnifications on a computer screen. For this purpose, the PCE-MM 800 microscope is connected to a screen. This allows a large presentation visible by several people.
- 200 ... 1600-times magnification
- Bright LED lighting
- Maximum display: 1600 x 1200 pixels
- USB interface
- Digital zoom
The mechanical 3D Inspection Camera PCE-IVM 3D can be used for reflected light and transmitted light microscopy and therefore allows the creation of three-dimensional representations of the objects. This 3D mechanical Inspection Camera that allows object to be checked all around thanks to a mechanical mirror (360°).
- Magnification continuously from 12 ... 75 times
- Height adjustable for larger objects
- Incident and transmitted illumination
- Data transfer via USB 2.0
- 360° rotatable mirror
The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting
The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting
The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting
The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting
The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting
The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.
- 10 Newtons UCI probe / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting