Products for 'top check fn'

£ 846.00

Price excl. VAT &. delivery

The Material Thickness Meter works with a measuring probe that only requires a small contact surface and low contact pressure. The Material Thickness Meter is barely larger than a measuring probe and is particularly suitable for measuring thin layers on uneven or complex surfaces, such as tin cans.

Measuring range: 2 ... 1000 µm
Resolution: 0.1 µm
for FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP64 housing

Material Thickness Meter LM-TC-FERRO

£ 704.00

Price excl. VAT &. delivery

The Material Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, enabling precise coating thickness measurements at any time. Thanks to its compact design and low weight, the Material Thickness Meter is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

For FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP54 housing

Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

£ 920.00

Price excl. VAT &. delivery

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Thickness Meter PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate

£ 899.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Thickness Meter LM-TC-DUAL

£ 793.00

Price excl. VAT &. delivery

The Material Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Material Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Material Thickness Meter PCE-CT 80-FN3

£ 791.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN2D5

£ 784.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN2

£ 773.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN1D5

£ 764.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate

£ 914.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Thickness Meter PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 80-FN0D5

£ 616.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

£ 745.00

Price excl. VAT &. delivery

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 27FN-ICA incl. ISO Calibration Certificate

£ 499.00

Price excl. VAT &. delivery

PCE-CT 27FN is a material thickness meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

Measuring range of 0 … 1250 µm / 0 … 50 mils
Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
Features a resolution of 0.1 µ / 0.1 mils
Incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 27FN

£ 398.00

Price excl. VAT &. delivery

Measuring range of 0 … 1250 µm / 0 … 50 mils
Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
Features a resolution of 0.1 µ / 0.1 mils

Material Thickness Meter PCE-CT 25FN-ICA incl. ISO Calibration Certificate

£ 272.00

Price excl. VAT &. delivery

The material thickness meter is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this material thickness meter does not have to differentiate between ferrous and non-ferrous metal.

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)

Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 26FN-ICA Incl. ISO Calibration Certificate

£ 322.00

Price excl. VAT &. delivery

The material thickness meter can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The material thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle.

Measuring range: 0 … 1250 μm / 0 … 49.2 mils
Resolution: 1 μm / 0.039 mils
Accuracy: ± (3% + 2 μm / 0.079 mils)
Wear-resistant sensor
V-groove for measurement on pipes
Incl. ISO calibration certificate

Material Thickness Meter PCE-CT 26FN

£ 183.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 μm / 0 … 49.2 mils
Resolution: 1 μm / 0.039 mils
Accuracy: ± (3% + 2 μm / 0.079 mils)
Wear-resistant sensor
V-groove for measurement on pipes

Material Thickness Meter PCE-CT 25FN

£ 130.00

Price excl. VAT &. delivery

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm

Material Thickness Meter PCE-CT 1000

£ 1,647.00

Price excl. VAT &. delivery

The Material Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Material Coating Thickness Meter PCE-CT 65

£ 200.00

Price excl. VAT &. delivery

PCE-CT 65 is a material coating thickness meter that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

Measuring range of 0 … 1350 µm / 0 … 53 mils
Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
Saves up to 1500 measurements to memory

Material Thickness Meter PCE-CT 1000-ICA incl. ISO-Calibration Certificate

£ 0.00

Price excl. VAT &. delivery

The Material Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood, or glass, as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software
incl. ISO Calibration Certificate