Suitable for determining the humidity of bulk substances, this moisture test instrument can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances. These test instruments / test sensors are mainly for use in manufacturing processes to give the opportunity of process optimization to the manufacturer or to insure the moisture content of the final product.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

The compact pressure sensor is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure sensor is ideal for mobile applications, such as test beds.

- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
- incl. ISO Calibration Certificate 

The PCE-830 Portable Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Portable Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

The 3-Phase-Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase-Power Meter / 3-Phase Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

 

The compact pressure indicator is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure indicator is ideal for mobile applications, such as test beds.

- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5

The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission

PCE-CSM 7 is a portable colorimeter used to measure different spectral parameters. This user-friendly, ergonomically designed colorimeter automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control and assurance as well as product research and development, the colorimeter offers impressive measuring accuracy and comes manufacturer calibrated. Integrated camera/illumination locating for small samples.

- Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v* 
  CIEL*C*h +Yellowness + Whiteness + Color Fastness
- Offers two different measuring apertures
- Three light sources D65, D50, A
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Illumination/Viewing Angles 8°/d 

The NDT test instrument PCE-VE 1000 is an industrial endoscope, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.

- Stores photos and saves videos with sound to the included 8 GB SD memory
  card (max. compatibility 32 GB) for quick and easy transfer to a computer
- 360° image rotation (in 90° steps)
- Digital zoom on camera

Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.

Our universal testing machine PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.

- Measuring range: max. 5000 N / 500 kg
- Feed speed: 30 mm/min ... 230 mm/min
- All PCE devices adaptable
- Robust steel design

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

- Measuring width: 0 ... 999,999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth printer interface
- Automatic calibration
- For HACCP implementation
- Data storage
- Enables rapid detection of bacterial or microbial residue
- Incl. 100 Test tubes (swabs)

The industrial borescope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 4 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

- Cable / head diameter: 4 mm
- Direction of movement camera head: 4-way
- Camera head length: 18 mm
- Bending radius: 8 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP67 camera cable
- 1,000,000 pixel image resolution

The pressure sensor is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the pressure sensor. Thus, the pressure sensor is ideal for mobile applications, such as test beds.

- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units