The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples

- 3D rotation 360°
- Lens magnification: 0.3 ... 2.2 times
- Picture format 1920 x 1080 Full HD
- Focusing range 250 mm / 9.8 in

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test

Our motorized force gauge can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force gauge offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The digital thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the digital thermometer already covers a large temperature range. The emission value of the digital thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images

The force gauge measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gauges.

Force Gauge PCE-DFG N 5K
- Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs
- Resolution: 1N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display

Test Stand PCE-MTS500
- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel path: max. 300 mm / 11.8"
- Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC

- Function: convert analog signal into usable value
- Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC
- Display range: -1999 ... 9999
- Digit height: 100 mm / 3.9"
- Number of outputs: 2
- Voltage supply: 11 ... 36 V DC

Force test stand
The motorised force test stand can be used for vertical tensile and compressive force tests. All force gauges from PCE Instruments can be mounted on the force test stand (if necessary with an adapter plate). The force test stand can withstand a maximum load of 500 N.

- Force range: max. 500 N / 50 kg / 110 lb
- Travel path: max. 270 mm / 10.6"
- Feed speed: 1 ... 500 mm/min
- Manual or automatic procedure

Force gauge
Digital force gauge for tensile force measurement and compressive force measurement up to 500 N. The digital force gauge is for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Tensile and compressive force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Memory for 100 measurements
- 220V AC ONLY

PCE-T 1200 is a 12-channel datalogging digital thermometer that accommodates SD cards up to 16 GB in size. The optional software allows the digital thermometer to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel

The digital thermometer has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the digital thermometer already covers a large temperature range. The emission value of the digital thermometer can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
- incl. ISO Calibration Certificate

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface