Shipping Scale PCE-WWSB8-S
£ 2,354.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WWSB8-S is a portable floor scale for shipping consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Vehicle Weighing Pads PCE-WWSB8-S
£ 2,354.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WWSB8-S are vehicle weighing pads, portable weighbridge or floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing pads (additional weighing pads sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Weighbridge PCE-WWSB8-S
£ 2,354.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WWSB8-S is a portable weighbridge or floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Gas Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
NDT Tester PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Ultrasonic Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Clamp-on Ultrasonic Flow Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on Clamp-on Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Clamp-on Ultrasonic Flow Meter PCE-TDS 100HS-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100HS-ICA is a portable handheld clamp-on Clamp-on Ultrasonic Flow Meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 100H-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 100HS-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm
- Sensor temperature range: 32 ... 320°F
- Sensor installation: V, (N,W)
- incl. sensors TDS-S1
- incl. ISO Calibration Certificate

Ultrasonic Flow Meter PCE-TDS 100HS-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Tester PCE-TDS 100H-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Ultrasonic Flow Tester PCE-TDS 100HS-ICA incl. ISO Calibration Certificate
£ 1,476.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Climate Meter PCE-DPM 10-SFKIT incl. Smart Features
£ 3,667.00
Price excl. VAT &. delivery
2 year Warranty
The climate meter from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

- Dew point measuring range from -100 ... +50 °C
- Pressure range up to 15 bar differential pressure
- Data logger for up to 100 million measured values
- Adjustable alarm limits
- Touch LC display
Smart features:
- Prediction of the final dew point value
- Camera function
- PDF report function in accordance with ISO 8573-1