Products for 'Medidor de pH PCE PH 25 '

Environmental Tester PCE-PH 22-ICA incl. ISO calibration certificate

£ 145.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental tester.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

Dust Monitor PCE-MPC 25

£ 934.00

Price excl. VAT &. delivery
2 year Warranty

The dust monitor is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust monitor determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10

- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm

- Mass concentration

- Particle counter

- Temperature

- Humidity (RH)

- Flash memory for approx. 12 measurement runs

Environmental Tester PCE-MPC 25

£ 934.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental tester determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

Particle Counter PCE-MPC 25

£ 934.00

Price excl. VAT &. delivery
2 year Warranty

The particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

Environmental Meter PCE-PH 23

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-PH 23 is used for rapid fluid analysis. The environmental meter offers the possibility of determining the temperature and the pH value. The operation of the environmental meter PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)

Environmental Tester PCE-PH 23

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester PCE-PH 23 is used for rapid fluid analysis. The environmental tester offers the possibility of determining the temperature and the pH value. The operation of the environmental tester PCE-PH 23 is carried out via the four front-mounted buttons.

pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1

£ 522.00

Price excl. VAT &. delivery
2 year Warranty

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit.

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

Environmental Meter PCE-PH 18

£ 71.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-PH 18 is a environmental meter with a pointed glass electrode. Thanks to this glass electrode, the environmental meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Puncture electrode (soft bottoms)
- Exchangeable electrode through BNC connection

Environmental Meter PCE-PH 22

£ 89.00

Price excl. VAT &. delivery
2 year Warranty

The waterproof environmental meter is used for fast and accurate measurement of pH and temperature. Due to the practical double display, both values can be read simultaneously on the environmental meter. The waterproof and robust housing (IP 67) means the environmental meter can be used under difficult conditions.

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67

pH / Cond. / Salt / Oxygen Water Quality Data Logger PCE-PHD 1-ICA incl. ISO Cal

£ 427.00

Price excl. VAT &. delivery
2 year Warranty

The PCE-PHD 1-ICA pH / Conductivity / Salt / Oxygen Water Quality Data Logger is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the data logger is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.

- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included
- incl. ISO Calibration Certificate

Data Logger with USB Interface PCE-MPC 25

£ 934.00

Price excl. VAT &. delivery
2 year Warranty

The data logger with USB interface is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger with USB interface determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

Temperature Data Logger PCE-MPC 25

£ 934.00

Price excl. VAT &. delivery
2 year Warranty

The temperature data logger is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the temperature data logger determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

Water Analysis Meter PCE-PH 22-ICA incl. ISO calibration certificate

£ 145.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values can be read simultaneously on the water analysis meter.

Environmental Meter PCE-PH 17

£ 67.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-PH 17 is a environmental meter with a pH electrode made entirely of glass. The fact that the electrode of the environmental meter is made of glass makes cleaning the electrode easier and more thorough.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 28°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection
- Exchangeable glass electrode

Water Analysis Meter PCE-PH 23

£ 80.00

Price excl. VAT &. delivery
2 year Warranty

The water analysis meter PCE-PH 23 is used for rapid fluid analysis. The water analysis meter offers the possibility of determining the temperature and the pH value. The operation of the water analysis meter PCE-PH 23 is carried out via the four front-mounted buttons.

HVAC Meter PCE-UFM 25

£ 823.00

Price excl. VAT &. delivery
2 year Warranty

With our fixed installation HVAC meter, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The fixed installation HVAC meter is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

- Measurement Range: 0.1 ... 5 m/s

- Resolution: 0.001 m/s

- Accuracy: 2%

- Pipe Size: DN25 / 1"

- Display Type: OLED

- Analog Output: 4 ... 20mA

Environmental Meter PCE-PH 16

£ 67.00

Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-PH 16 is a very easy-to-use measuring device for determining the pH value in a wide variety of liquids. Using the BNC connection of the environmental meter PCE-PH 16, a wide variety of pH electrodes can also be connected to the environmental meter PCE-PH 16.

- Measuring range: 0.00 ... 14.00 pH
- Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
- Resolution: 0.01 pH
- Ideal for school facilities
- Exchangeable electrode through BNC connection

Environmental Tester PCE-PH 18

£ 71.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester PCE-PH 18 is a environmental tester with a pointed glass electrode. Thanks to this glass electrode, the environmental tester PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.