The Three-Phase Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. 

- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

The stainless steel U-shaped floor scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped floor scale are tailored to a range of EU sizes.

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

The stainless steel U-shaped industrial scales are certifiable scales supplied in calibrated form. The dimensions of the stainless steel U-shaped industrial scales are tailored to a range of EU sizes.

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

The stainless steel floor scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel floor scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

The stainless steel industrial scale is made entirely of high quality, acid resistant stainless steel. The weighing cells installed in the stainless steel industrial scale have a protection class of IP68.

- Weighing range : 300 kg
- Readability : 0.1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

PCE-DMS 200 is a GSM paper basis weight balance or scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

PCE-DMS 200 is a GSM paper basis weight scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

The PCE-DMS 200 is a LAB scale for paper basis weight used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

PCE-DMS 200 is a laboratory balance for paper basis weight used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing 11 cm circle cut samples

PCE-DMS 200 is a paper basis weight balance or scale used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing 11 cm circle cut samples

PCE-DMS 200 is a quadrant scale for paper basis weight used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².

- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

- Weighing range : 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III